2 # Copyright (c) 1998-2001 Robert Woodcock <rcw@debian.org>
3 # Copyright (c) 2003-2006 Jesus Climent <jesus.climent@hispalinux.es>
4 # This code is hereby licensed for public consumption under either the
5 # GNU GPL v2 or greater, or Larry Wall's Artistic license - your choice.
7 # You should have received a copy of the GNU General Public License along
8 # with this program; if not, write to the Free Software Foundation, Inc.,
9 # 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
11 # Copyright for this work is to expire January 1, 2010, after which it
12 # shall be public domain.
16 VERSION='2.3.99-$Revision$'
20 echo "This is abcde v$VERSION."
21 echo "Usage: abcde [options] [tracks]"
23 echo "-1 Encode the whole CD in a single file"
24 echo "-a <action1[,action2]...>"
25 echo " Actions to perform:"
26 echo " cddb,read,normalize,encode,tag,move,replaygain,playlist,clean"
27 #echo "-A Experimental actions (retag, transcode)"
28 echo "-b Enable batch normalization"
29 #echo "-B Disable batch replaygain (do file by file)"
31 echo " Specify a configuration file (overrides system and user config files)"
33 echo " Specify discid to resume from (only needed if you no longer have the cd)"
35 echo " Specify CDROM device to grab (flac uses a single-track flac file)"
36 echo "-D Debugging mode (equivalent to sh -x abcde)"
37 echo "-e Erase encoded track information from status file"
38 echo "-f Force operations that otherwise are considered harmful. Read \"man abcde\""
39 echo "-g Use \"lame --nogap\" for MP3 encoding. Disables low disk and pipes flags"
40 echo "-h This help information"
41 #echo "-i Tag files while encoding, when possible (local only) -NWY-"
42 echo "-j <#> Number of encoder processes to run at once (localhost)"
43 echo "-k Keep the wav tracks for later use"
44 echo "-l Use low disk space algorithm"
45 echo "-L Use local CDDB storage directory"
46 echo "-n No lookup. Don't query CDDB, just create and use template"
47 echo "-N Noninteractive. Never prompt for anything"
48 echo "-m Modify playlist to include CRLF endings, to comply with some players"
49 echo " WARNING: Deprecated. Use \"cue\" action"
50 echo "-M Create a CUE file"
51 echo "-o <type1[,type2]...>"
52 echo " Output file type(s) (vorbis,mp3,flac,spx,mpc,wav,m4a). Defaults to vorbis"
53 echo "-p Pad track numbers with 0's (if less than 10 tracks)"
54 echo "-P Use UNIX pipes to read+encode without wav files"
55 echo "-r <host1[,host2]...>"
56 echo " Also encode on these remote hosts"
57 echo "-R Use local CDDB in recursive mode"
59 echo " Show dielfs from the CDDB info (year,genre)"
60 echo "-S <#> Set the CD speed"
61 echo "-t <#> Start the track numbering at a given number"
62 echo "-T <#> Same as -t but modifies tag numbering"
63 echo "-U Do NOT use UNICODE (UTF8) tags and comments"
64 echo "-v Show version number and exit"
65 echo "-V Be a bit more verbose about what is happening behind the scenes"
66 echo "-x Eject CD after all tracks are read"
68 echo " Add a comment to the CD tracks"
69 echo "-W <#> Contatenate CDs: -T #01 -w \"CD #\""
70 echo "-z Use debug CDROMREADERSYNTAX option (needs cdparanoia)"
72 echo "Tracks is a space-delimited list of tracks to grab."
73 echo "Ranges specified with hyphens are allowed (i.e., 1-5)."
75 #echo "Double hyphens are used to concatenate tracks"
80 echo "$@" >> "$ABCDETEMPDIR/status"
83 # log [level] [message]
85 # log outputs the right message in a common format
91 error) echo "[ERROR] abcde: $@" >&2 ;;
92 warning) echo "[WARNING] $@" >&2 ;;
93 info) echo "[INFO] $@" ;;
97 # Funtions to replace the need of seq, which is too distribution dependant.
101 while [ $i -ne `expr $2 + 1` ]
111 if echo $i | grep "[[:digit:]]" > /dev/null 2>&1 ; then
112 while [ $i -ne `expr $2 + 1` ]
119 log error "syntax error while processing track numbers"
124 # Functions to replace the need of awk {print $1} and {print $NF}
127 if [ X"$1" = "X" ]; then
128 for first in `cat`; do
139 if [ X"$1" = "X" ]; then
140 for stdin in `cat`; do
144 for last in $@ ; do :; done
149 # checkstatus [blurb]
150 # Returns "0" if the blurb was found, returns 1 if it wasn't
151 # Puts the blurb content, if available, on stdout.
152 # Otherwise, returns "".
155 # Take the last line in the status file if there's multiple matches
157 BLURB=$(egrep $PATTERN "$ABCDETEMPDIR/status" | tail -n 1)
159 if [ -z "$BLURB" ]; then
164 # See if there's a = in it
165 if [ "$(echo $BLURB | grep -c =)" != "0" ]; then
166 echo "$(echo $BLURB | cut -f2- -d=)"
172 # checkwarnings [blurb]
173 # Returns "0" if the blurb was found (meaning there was an warning),
174 # returns 1 if it wasn't (yes this is a little backwards).
175 # Does not print the blurb on stdout.
176 # Otherwise, returns "".
179 if [ -e "$ABCDETEMPDIR/warnings" ]; then :; else
182 # Take the last line in the status file if there's multiple matches
184 BLURB="$(egrep $PATTERN "$ABCDETEMPDIR/warnings" | tail -n 1)"
186 if [ -z "$BLURB" ]; then
187 # negative, we did not have a negative...
190 # affirmative, we had a negative...
195 # checkerrors [blurb]
196 # Returns "0" if the blurb was found (meaning there was an error),
197 # returns 1 if it wasn't (yes this is a little backwards).
198 # Does not print the blurb on stdout.
199 # Otherwise, returns "".
202 if [ -e "$ABCDETEMPDIR/errors" ]; then :; else
205 # Take the last line in the status file if there's multiple matches
207 BLURB="$(egrep $PATTERN "$ABCDETEMPDIR/errors" | tail -n 1)"
209 if [ -z "$BLURB" ]; then
210 # negative, we did not have a negative...
213 # affirmative, we had a negative...
219 # Finds the right pager in the system to display a file
223 # Use the debian sensible-pager wrapper to pick the pager
224 # user has requested via their $PAGER environment variable
225 if [ -x "/usr/bin/sensible-pager" ]; then
226 /usr/bin/sensible-pager "$PAGEFILE"
227 elif [ -x "$PAGER" ]; then
228 # That failed, try to load the preferred editor, starting
229 # with their PAGER variable
231 # If that fails, check for less
232 elif [ -x /usr/bin/less ]; then
233 /usr/bin/less -f "$PAGEFILE"
234 # more should be on all UNIX systems
235 elif [ -x /bin/more ]; then
236 /bin/more "$PAGEFILE"
238 # No bananas, just cat the thing
243 # run_command [blurb] [command...]
244 # Runs a command, silently if necessary, and updates the status file
249 # See if this is supposed to be silent
250 if [ "$(checkstatus encode-output)" = "loud" ]; then
254 # Special case for SMP, since
255 # encoder output is never displayed, don't mute echos
256 if [ -z "$BLURB" -a "$MAXPROCS" != "1" ]; then
265 normalize|normalize-audio)
266 if [ "$RETURN" = "2" ]; then
267 # File was already normalized.
272 if [ "$RETURN" != "0" ]; then
273 # Put an error in the errors file. For various reasons we
274 # can't capture a copy of the program's output but we can
275 # log what we attempted to execute and the error code
276 # returned by the program.
277 if [ "$BLURB" ]; then
280 echo "${TWEAK}returned code $RETURN: $@" >> "$ABCDETEMPDIR/errors"
281 return $RETURN # Do not pass go, do not update the status file
283 if [ "$BLURB" ]; then
284 echo $BLURB >> "$ABCDETEMPDIR/status"
288 # relpath() and slash() are Copyright (c) 1999 Stuart Ballard and
289 # distributed under the terms of the GNU GPL v2 or later, at your option
291 # Function to determine if a word contains a slash.
300 # Function to give the relative path from one file to another.
301 # Usage: relpath fromfile tofile
302 # eg relpath music/Artist/Album.m3u music/Artist/Album/Song.mp3
303 # (the result would be Album/Song.mp3)
304 # Output is relative path to $2 from $1 on stdout
306 # This code has the following restrictions:
307 # Multiple ////s are not collapsed into single /s, with strange effects.
308 # Absolute paths and ../s are handled wrong in FR (but they work in TO)
309 # If FR is a directory it must have a trailing /
317 /*) ;; # No processing is needed for absolute paths
319 # Loop through common prefixes, ignoring them.
320 while slash "$FR" && [ "$(echo "$FR" | cut -d/ -f1)" = "$(echo "$TO" | cut -d/ -f1)" ]
322 FR="$(echo "$FR" | cut -d/ -f2-)"
323 TO="$(echo "$TO" | cut -d/ -f2-)"
325 # Loop through directory portions left in FR, adding appropriate ../s.
328 FR="$(echo "$FR" | cut -d/ -f2-)"
339 if [ ! "$@" = "" ]; then
340 # Cut off any command-line option we added in
341 X=$(echo $@ | cut -d' ' -f2)
342 if [ "$(which $X)" = "" ]; then
344 elif [ ! -x $(which $X) ]; then
353 if [ ! "$@" = "" ]; then
354 # Cut off any command-line option we added in
355 X=$(echo $@ | cut -d' ' -f2)
356 # Test for built-in abcde.function
357 [ "$X" != "${X#abcde.}" ] && type $X >/dev/null 2>&1 && return
358 if [ "$(which $X)" = "" ]; then
359 log error "$X is not in your path." >&2
360 log info "Define the full path to the executable if it exists on your system." >&2
362 elif [ ! -x "$(which $X)" ]; then
363 log error "$X is not executable." >&2
369 # diffentries <filename> <max_value> <entry1>,<entry2>
370 # max_value: the range of entries goes from 1 to <max_value>
375 local CDDBDIFFCHOICES=$1
377 local CDDBDIFFCHOICE="$@"
378 if [ ! X"$DIFF" = "X" ]; then
379 PARSECHOICE1=$(echo $CDDBDIFFCHOICE | cut -d"," -f1 | xargs printf %d 2>/dev/null)
380 PARSECHOICE2=$(echo $CDDBDIFFCHOICE | cut -d"," -f2 | xargs printf %d 2>/dev/null)
381 if [ $PARSECHOICE1 -lt 1 ] || [ $PARSECHOICE1 -gt $CDDBDIFFCHOICES ] || \
382 [ $PARSECHOICE2 -lt 1 ] || [ $PARSECHOICE2 -gt $CDDBDIFFCHOICES ] || \
383 [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
384 echo "Invalid diff range. Please select two coma-separated numbers between 1 and $CDDBDIFFCHOICES" >&2
386 # We parse the 2 choices to diff, store them in temporary files and diff them.
387 for PARSECHOICE in $(echo $CDDBDIFFCHOICE | tr , \ ); do
388 do_cddbparse "$ABCDETEMPDIR/$FILENAME.$PARSECHOICE" > "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE"
390 echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/$FILENAME.diff"
391 $DIFF $DIFFOPTS "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/$FILENAME.diff"
392 if [ $(cat "$ABCDETEMPDIR/$FILENAME.diff" | wc -l) -ge 24 ]; then
393 page "$ABCDETEMPDIR/$FILENAME.diff"
395 cat "$ABCDETEMPDIR/$FILENAME.diff" >&2
399 echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBDIFFCHOICES." >&2
404 # Finds an specific field from cddbinfo
409 TRACKNAME="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
412 TRACKNAME="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
418 # Get the track number we are going to use for different actions
421 if [ -n "$STARTTRACKNUMBER" ] ; then
422 # Get the trackpadding from the current track
423 CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
424 TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - $FIRSTTRACK ))
426 TRACKNUM=${UTRACKNUM}
432 # Calculate cddb disc ids without requiring specialized helper programs.
433 # largely copied from cd-discid and musicbrainz examples. some of the steps
434 # don't make sense, but they're necessary to match the ids generated by other
437 ## FIXME ## Right now, we get 2 frames more than with cue2discid ??
438 # data@petit:~$ sh /tmp/cue2discid /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac
439 # processing offsetimes 00:00:00 04:47:10 08:20:37 11:46:46 17:45:36 21:41:57 27:32:21 32:03:73 35:39:28 38:27:33 43:50:38 44:42:34
440 # 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2895
441 # data@petit:~$ metaflac --export-cuesheet-to=- /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac| python /home/data/sources/abcde/trunk/examples/cue2discid
442 # 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2893
444 # Variables: OFFSETS, TRACKS, LEADOUT, [LEADIN]
447 if [ X"$LEADOUT" = "X" ]; then
448 log warning "Error trying to calculate disc ids without lead-out information."
452 # default to a two second lead-in
454 LEADIN=${LEADIN:=150}
456 # number of cdframes per second
459 # reset cddb checksum for cddb disc-id calululation
463 for OFFSET in $(echo $OFFSETS)
465 COOKEDOFFSETS="${COOKEDOFFSETS} $(($OFFSET + $LEADIN))"
467 OFFSETTIME=$(( ($OFFSET + $LEADIN) / $CDFRAMES ))
468 while [ $OFFSETTIME -gt 0 ]; do
469 CDDBCKSUM=$(($CDDBCKSUM + $OFFSETTIME % 10))
470 OFFSETTIME=$(($OFFSETTIME / 10))
475 COOKEDOFFSETS="${COOKEDOFFSETS:1}" # eat the leading space
477 PREGAP=$(($(echo $OFFSETS | cut -f1 -d' ')))
478 TOTALTIME=$(( (($LEADOUT + $LEADIN + $PREGAP) / $CDFRAMES) - (($LEADIN + $PREGAP) / $CDFRAMES)))
480 printf -v HEXSUM "%08lx" $(( ($CDDBCKSUM % 0xff) << 24 | $TOTALTIME << 8 | $TRACKS))
481 TRACKINFO="${HEXSUM} $((TRACKS)) ${COOKEDOFFSETS} $((($LEADOUT + $LEADIN + $IDMAGICNUM) / $CDFRAMES))"
486 if checkstatus replaygain; then :; else
487 run_command "" echo "Adding replygain information..."
488 for TMPOUTPUT in $( echo $OUTPUTTYPE | tr , \ )
492 OUTPUT=$OGGOUTPUTCONTAINER
495 OUTPUT=$FLACOUTPUTCONTAINER
503 for UTRACKNUM in $TRACKQUEUE
505 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
506 getcddbinfo TRACKNAME
508 TRACKFILE="$(mungefilename "$TRACKNAME")"
509 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
510 ALBUMFILE="$(mungefilename "$DALBUM")"
512 if [ "$ONETRACK" = "y" ]; then
513 if [ "$VARIOUSARTISTS" = "y" ]; then
514 OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
516 OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
519 if [ "$VARIOUSARTISTS" = "y" ]; then
520 OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT"\")"
522 OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT"\")"
525 OUTPUTFILES[$REPLAYINDEX]="$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
526 (( REPLAYINDEX = $REPLAYINDEX + 1 ))
530 run_command replaygain-flac nice $ENCNICE $METAFLAC --add-replay-gain "${OUTPUTFILES[@]}"
533 run_command replaygain-vorbis nice $ENCNICE $VORBISGAIN --album "${OUTPUTFILES[@]}"
536 run_command replaygain-mp3 nice $ENCNICE $MP3GAIN -a "${OUTPUTFILES[@]}"
539 run_command replaygain-mpc nice $ENCNICE $MPPGAIN --auto "${OUTPUTFILES[@]}"
544 if checkerrors "replaygain-.{3,6}"; then :; else
545 run_command replaygain true
550 # This code splits the a Various Artist track name from one of the following
553 # forward: Artist / Track
554 # forward-dash: Artist - Track
555 # reverse: Track / Artist
556 # reverse-dash: Track - Artist
557 # colon: Artist: Track
558 # trailing-paren: Artist (Track)
561 # VARIOUSARTISTS, VARIOUSARTISTSTYLE, TRACKNAME, TRACKARTIST
564 if [ "$VARIOUSARTISTS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
565 case "$VARIOUSARTISTSTYLE" in
567 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
568 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
569 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
572 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
573 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
574 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
577 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
578 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
579 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
582 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
583 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
584 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
587 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's-: -~-g')"
588 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
589 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
592 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's,^\(.*\) (\(.*\)),\1~\2,')"
593 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
594 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
597 elif [ "$VARIOUSARTISTS" = "y" ] && [ "$ONETRACK" = "y" ]; then
598 TRACKARTIST="Various"
600 TRACKARTIST="$DARTIST"
605 local genre=$(echo "${@}" | tr '[A-Z]' '[a-z]')
609 "classic rock") id=1 ;;
627 "industrial") id=19 ;;
628 "alternative") id=20 ;;
630 "death metal") id=22 ;;
632 "soundtrack") id=24 ;;
633 "euro-techno") id=25 ;;
637 "jazz+funk") id=29 ;;
640 "classical") id=32 ;;
641 "instrumental") id=33 ;;
645 "sound clip") id=37 ;;
648 "alt. rock") id=40 ;;
653 "meditative") id=45 ;;
654 "instrum. pop") id=46 ;;
655 "instrum. rock") id=47 ;;
659 "techno-indust.") id=51 ;;
660 "electronic") id=52 ;;
662 "eurodance") id=54 ;;
664 "southern rock") id=56 ;;
669 "christian rap") id=61 ;;
670 "pop/funk"|"pop / funk") id=62 ;;
672 "native american") id=64 ;;
675 "psychadelic") id=67 ;;
677 "showtunes") id=69 ;;
681 "acid punk") id=73 ;;
682 "acid jazz") id=74 ;;
686 "rock & roll") id=78 ;;
687 "hard rock") id=79 ;;
689 "folk/rock") id=81 ;;
690 "national folk") id=82 ;;
697 "bluegrass") id=89 ;;
698 "avantgarde") id=90 ;;
699 "gothic rock") id=91 ;;
700 "progress. rock") id=92 ;;
701 "psychadel. rock") id=93 ;;
702 "symphonic rock") id=94 ;;
703 "slow rock") id=95 ;;
706 "easy listening") id=98 ;;
712 "chamber music") id=104 ;;
714 "symphony") id=106 ;;
715 "booty bass") id=107 ;;
717 "porn groove") id=109 ;;
719 "slow jam") id=111 ;;
723 "folklore") id=115 ;;
725 "power ballad") id=117 ;;
726 "rhythmic soul") id=118 ;;
727 "freestyle") id=119 ;;
729 "punk rock") id=121 ;;
730 "drum solo") id=122 ;;
731 "a capella") id=123 ;;
732 "euro-house") id=124 ;;
733 "dance hall") id=125 ;;
735 "drum & bass") id=127 ;;
736 "club-house") id=128 ;;
737 "hardcore") id=129 ;;
741 "negerpunk") id=133 ;;
742 "polsk punk") id=134 ;;
744 "christian gangsta rap") id=136 ;;
745 "heavy metal") id=137 ;;
746 "black metal") id=138 ;;
747 "crossover") id=139 ;;
748 "contemporary christian")id=140 ;;
749 "christian rock") id=141 ;;
750 "merengue") id=142 ;;
752 "thrash metal") id=144 ;;
755 "synthpop") id=147 ;;
756 "rock/pop"|"rock / pop") id=148 ;;
763 # do_tag [tracknumber]
764 # id3 tags a filename
766 # TRACKS, TRACKNAME, TRACKARTIST, TAGGER, TAGGEROPTS, VORBISCOMMENT, METAFLAC,
767 # COMMENT, DALBUM, DARTIST, CDYEAR, CDGENRE (and temporarily) ID3TAGV
770 COMMENTOUTPUT="$(eval echo ${COMMENT})"
771 CDDBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
772 run_command '' echo "Tagging track $1 of $TRACKS: $TRACKNAME..."
773 # If we want to start the tracks with a given number, we need to modify the
774 # TRACKNUM value before evaluation
775 if [ -n "$STARTTRACKNUMBERTAG" ] ; then
778 for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
782 # id3v2 v0.1.9 claims to have solved the -c bug, so we merge both id3 and id3v2
783 GENREID=$(do_getgenreid "${CDGENRE}")
788 # FIXME # track numbers in mp3 come with 1/10, so we cannot
789 # happily substitute them with $TRACKNUM
790 run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $TAGGER $TAGGEROPTS \
791 --comment=::"$COMMENTOUTPUT" -A "$DALBUM" \
792 -a "$TRACKARTIST" -t "$TRACKNAME" -Y "$CDYEAR" \
793 -G "$GENREID" -n "${TRACKNUM:-$1}" "${TRACKNUM:+-N $TRACKS}" \
794 "${ENCODING:+--set-encoding=$ENCODING}" \
795 "$ABCDETEMPDIR/track$1.$OUTPUT"
797 # FIXME # Still not activated...
799 run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
800 -a "$DALBUM" -n "$TRACKARTIST" -s "$TRACKNAME" -y "$CDYEAR" \
801 -g "$GENREID" -k "${TRACKNUM:-$1}" \
802 "$ABCDETEMPDIR/track$1.$OUTPUT"
805 # FIXME # track numbers in mp3 come with 1/10, so we cannot
806 # happily substitute them with $TRACKNUM
807 run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
808 -A "$DALBUM" -a "$TRACKARTIST" -t "$TRACKNAME" -y "$CDYEAR" \
809 -g "$GENREID" -T "${TRACKNUM:-$1/$TRACKS}" \
810 "$ABCDETEMPDIR/track$1.$OUTPUT"
815 case "$OGGENCODERSYNTAX" in
817 # vorbiscomment can't do in-place modification, mv the file first
818 if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" -a ! -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" ]; then
819 mv "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
822 # These are from http://www.xiph.org/ogg/vorbis/doc/v-comment.html
823 echo ARTIST="$TRACKARTIST"
825 echo TITLE="$TRACKNAME"
826 if [ -n "$CDYEAR" ]; then
829 if [ -n "$CDGENRE" ]; then
830 echo GENRE="$CDGENRE"
832 echo TRACKNUMBER=${TRACKNUM:-$1}
833 echo CDDB=$CDDBDISCID
834 if [ "$(eval echo ${COMMENT})" != "" ]; then
835 case "$COMMENTOUTPUT" in
836 *=*) echo "$COMMENTOUTPUT";;
837 *) echo COMMENT="$COMMENTOUTPUT";;
840 ) | run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $VORBISCOMMENT $VORBISCOMMENTOPTS -w \
841 "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
842 # Doublecheck that the commented file was created successfully before wiping the original
843 if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" ]; then
844 rm -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
846 mv "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
853 echo ARTIST="$TRACKARTIST"
855 echo TITLE="$TRACKNAME"
856 if [ -n "$CDYEAR" ]; then
859 if [ -n "$CDGENRE" ]; then
860 echo GENRE="$CDGENRE"
862 echo TRACKNUMBER="${TRACKNUM:-$1}"
863 echo CDDB="$CDDBDISCID"
864 if [ "$(eval echo ${COMMENT})" != "" ]; then
865 case "$COMMENTOUTPUT" in
866 *=*) echo "$COMMENTOUTPUT";;
867 *) echo COMMENT="$COMMENTOUTPUT";;
870 ) | run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $METAFLAC $METAFLACOPTS ${IMPORTCUESHEET:+--import-cuesheet-from="$ABCDETEMPDIR/$CUEFILE"} --import-tags-from=- "$ABCDETEMPDIR/track$1.$FLACOUTPUTCONTAINER"
873 run_command tagtrack-$OUTPUT-$1 true
876 run_command tagtrack-$OUTPUT-$1 true
879 run_command tagtrack-$OUTPUT-$1 true
882 run_command tagtrack-$OUTPUT-$1 true
886 if checkerrors "tagtrack-(.{3,6})-$1"; then :; else
887 run_command tagtrack-$1 true
894 # OUTPUTTYPE, {FOO}ENCODERSYNTAX, ENCNICE, ENCODER, ENCODEROPTS
897 # The commands here don't go through run_command because they're never supposed to be silenced
898 echo "Encoding gapless MP3 tracks: $TRACKQUEUE"
899 for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
903 case "$MP3ENCODERSYNTAX" in
908 for UTRACKNUM in $TRACKQUEUE
910 TRACKFILES="$TRACKFILES track$UTRACKNUM.wav"
912 nice $ENCNICE $MP3ENCODER $MP3ENCODEROPTS --nogap $TRACKFILES
914 if [ "$RETURN" != "0" ]; then
915 echo "nogap-encode: $ENCODER returned code $RETURN" >> errors
917 for UTRACKNUM in $TRACKQUEUE
919 run_command encodetrack-$OUTPUT-$UTRACKNUM true
920 #run_command encodetrack-$UTRACKNUM true
929 if checkerrors "nogap-encode"; then :; else
930 if [ ! "$KEEPWAVS" = "y" ] ; then
931 if [ ! "$KEEPWAVS" = "move" ] ; then
936 # Other encoders fall through to normal encoding as the tracks
937 # have not been entered in the status file.
940 # do_encode [tracknumber] [hostname]
941 # If no hostname is specified, encode locally
943 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
946 if [ "$USEPIPES" = "y" ]; then
949 TEMPARG="PIPE_$MP3ENCODERSYNTAX"
952 TEMPARG="PIPE_$OGGENCODERSYNTAX"
955 TEMPARG="PIPE_$FLACENCODERSYNTAX"
958 TEMPARG="PIPE_$SPEEXENCODER"
961 TEMPARG="PIPE_$MPPENCODER"
964 TEMPARG="PIPE_$MPPENCODER"
967 IN="$( eval echo "\$$TEMPARG" )"
969 IN="$ABCDETEMPDIR/track$1.wav"
972 case "$MP3ENCODERSYNTAX" in
973 # FIXME # check if mp3enc needs -if for pipes
974 # FIXME # I have not been able to find a working mp3enc binary
988 # We need IN to proceed, if we are not using pipes.
989 if [ -s "$IN" -o X"$USEPIPES" = "Xy" ] ; then
990 for TMPOUTPUT in $(echo $OUTPUTTYPE | tr , \ )
994 OUTPUT=$OGGOUTPUTCONTAINER
997 OUTPUT=$FLACOUTPUTCONTAINER
1003 OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1004 if [ "$NOGAP" = "y" ] && checkstatus encodetrack-$OUTPUT-$1 ; then
1007 if [ X"$USEPIPES" = "Xy" ]; then
1009 # We need a way to store the creation of the files when using PIPES
1010 RUN_COMMAND_PIPES="run_command encodetrack-$OUTPUT-$1 true"
1011 # When pipping it does not make sense to have a higher nice for
1012 # reading than for encoding, since it will be hold by the
1013 # encoding process. Setting an effective nice, to calm down a
1014 # bit the reading process.
1015 EFFECTIVE_NICE=$READNICE
1017 run_command '' echo "Encoding track $1 of $TRACKS: $TRACKNAME..."
1018 RUN_COMMAND="run_command encodetrack-$OUTPUT-$1"
1019 EFFECTIVE_NICE=$ENCNICE
1025 case "$MP3ENCODERSYNTAX" in
1026 lame|toolame|gogo) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS "$IN" "$OUT" ;;
1027 bladeenc) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS -quit "$IN" ;;
1028 l3enc|xingmp3enc) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER "$IN" "$OUT" $MP3ENCODEROPTS ;;
1029 # FIXME # Relates to the previous FIXME since it might need the "-if" removed.
1030 mp3enc) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER -if "$IN" -of "$OUT" $MP3ENCODEROPTS ;;
1034 $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev/null 2>&1
1041 case "$OGGENCODERSYNTAX" in
1042 vorbize) $RUN_COMMAND nice $EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -w "$OUT" "$IN" ;;
1043 oggenc) $RUN_COMMAND nice $EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -o "$OUT" "$IN" ;;
1047 $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev/null 2>&1
1054 case "$FLACENCODERSYNTAX" in
1055 flac) $RUN_COMMAND nice $EFFECTIVE_NICE $FLACENCODER -f $FLACENCODEROPTS -o "$OUT" "$IN" ;;
1060 vecho "$DISTMP3 $DISTMP3OPTS $2 $IN $OUT >/dev/null 2>&1"
1061 $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" > /dev/null 2>&1
1066 if [ "$(eval echo ${COMMENT})" != "" ]; then
1069 *) COMMENT="COMMENT=$COMMENT" ;;
1071 COMMENT="--comment \"$COMMENT\""
1073 # Quick hack to avoid tagging Ogg/Speex, since there is no other way to tag than inline tagging
1074 if [ ! "$DOTAG" = "y" ]; then
1075 $RUN_COMMAND nice $EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS --author "$TRACKARTIST" --title "$TRACKNAME" "$COMMENT" "$IN" "$OUT"
1077 $RUN_COMMAND nice $EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS "$IN" "$OUT"
1081 # MPP/MP+(Musepack) format (.mpc) is done locally, with inline
1083 # I tried compiling the mppenc from corecodecs.org and got some
1084 # errors, so I have not tried it myself.
1085 ## FIXME ## Needs some cleanup to determine if an empty tag sent
1086 ## FIXME ## to the encoder ends up empty.
1087 $RUN_COMMAND nice $EFFECTIVE_NICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
1090 # Quick hack to avoid tagging Ogg/Speex, since there is no other way to tag than inline tagging
1091 if [ ! "$DOTAG" = "y" ]; then
1092 $RUN_COMMAND nice $EFFECTIVE_NICE $AACENCODER $AACENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -o "$OUT" "$IN"
1095 $RUN_COMMAND nice $ENCNICE $AACENCODER $AACENCODEROPTS -o "$OUT" "$IN"
1099 # In case of wav output we need nothing. Just keep the wavs.
1104 # Only remove .wav if the encoding succeeded
1105 if checkerrors "encodetrack-(.{3,6})-$1"; then :; else
1106 run_command encodetrack-$1 true
1107 if [ ! "$KEEPWAVS" = "y" ] ; then
1108 if [ ! "$KEEPWAVS" = "move" ] ; then
1114 run_command "" echo "HEH! The file we were about to encode disappeared:"
1115 run_command "" echo ">> $IN"
1116 run_command encodetrack-$1 false
1120 # do_preprocess [tracknumber]
1122 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1125 # IN="$ABCDETEMPDIR/track$1.wav"
1126 # # We need IN to proceed.
1127 # if [ -s "$IN" ] ; then
1128 # for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1130 # #OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1131 # run_command '' echo "Pre-processing track $1 of $TRACKS..."
1132 # case "$POSTPROCESSFORMAT" in
1134 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $WAV_PRE $IF $OF ;;
1136 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $MP3_PRE $IF $OF ;;
1138 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $OGG_PRE $IF $OF ;;
1140 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $FLAC_PRE $IF $OF ;;
1142 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $SPX_PRE $IF $OF ;;
1145 # # Only remove .wav if the encoding succeeded
1146 # if checkerrors "preprocess-(.{3,4})-$1"; then
1147 # run_command preprocess-$1 false
1149 # run_command preprocess-$1 true
1152 # if [ "$(checkstatus encode-output)" = "loud" ]; then
1153 # echo "HEH! The file we were about to pre-process disappeared:"
1156 # run_command preprocess-$1 false
1161 # do_postprocess [tracknumber]
1163 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1166 # for POSTPROCESSFORMAT in $(echo $POSTPROCESSFORMATS | tr , \ )
1168 # IN="$ABCDETEMPDIR/track$1.$POSTPROCESSFORMAT"
1169 # # We need IN to proceed.
1170 # if [ -s "$IN" ] ; then
1171 # #OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1172 # run_command '' echo "Post-processing track $1 of $TRACKS..."
1173 # case "$POSTPROCESSFORMAT" in
1175 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $MP3_POST $IF $OF ;;
1177 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $OGG_POST $IF $OF ;;
1179 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $FLAC_POST $IF $OF ;;
1181 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $SPX_POST $IF $OF ;;
1183 # # Only remove .wav if the encoding succeeded
1184 # if checkerrors "postprocess-(.{3,4})-$1"; then
1185 # run_command postprocess-$1 false
1187 # run_command postprocess-$1 true
1190 # if [ "$(checkstatus encode-output)" = "loud" ]; then
1191 # echo "HEH! The file we were about to post-process disappeared:"
1194 # run_command postprocess-$1 false
1209 # MP3GAIN, MP3GAINOPTS, VORBISGAIN, VORBISGAINOPTS, MPPGAIN, MPPGAINOPTS
1213 # The commands here don't go through run_command because they're never supposed to be silenced
1214 echo "Batch analizing gain in tracks: $TRACKQUEUE"
1219 for UTRACKNUM in $TRACKQUEUE
1221 MP3FILES="$TRACKFILES track$UTRACKNUM.mp3"
1223 # FIXME # Hard-coded batch option!
1224 $NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
1226 if [ "$RETURN" != "0" ]; then
1227 echo "batch-normalize: $NORMALIZER returned code $RETURN" >> errors
1229 for UTRACKNUM in $TRACKQUEUE
1231 echo normalizetrack-$UTRACKNUM >> status
1237 # do_batch_normalize
1239 # NORMALIZER, NORMALIZEROPTS
1240 do_batch_normalize ()
1242 # The commands here don't go through run_command because they're never supposed to be silenced
1243 echo "Batch normalizing tracks: $TRACKQUEUE"
1248 for UTRACKNUM in $TRACKQUEUE
1250 TRACKFILES="$TRACKFILES track$UTRACKNUM.wav"
1252 # XXX: Hard-coded batch option!
1253 $NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
1255 if [ "$RETURN" != "0" ]; then
1256 echo "batch-normalize: $NORMALIZER returned code $RETURN" >> errors
1258 for UTRACKNUM in $TRACKQUEUE
1260 echo normalizetrack-$UTRACKNUM >> status
1266 # do_normalize [tracknumber]
1268 # TRACKS, TRACKNAME, NORMALIZER, NORMALIZEROPTS
1271 IN="$ABCDETEMPDIR/track$1.wav"
1272 if [ -e "$IN" ] ; then
1273 run_command '' echo "Normalizing track $1 of $TRACKS: $TRACKNAME..."
1274 run_command normalizetrack-$1 $NORMALIZER $NORMALIZEROPTS "$IN"
1276 if [ "$(checkstatus encode-output)" = "loud" ]; then
1277 echo "HEH! The file we were about to normalize disappeared:"
1280 run_command normalizetrack-$1 false "File $IN was not found"
1284 # do_move [tracknumber]
1285 # Deduces the outfile from environment variables
1286 # Creates directory if necessary
1288 # TRACKNUM, TRACKNAME, TRACKARTIST, DALBUM, OUTPUTFORMAT, CDGENRE, CDYEAR
1291 for TMPOUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1293 # For now, set OUTPUT as TMPOUTPUT, and then change it once we have
1294 # defined the OUTPUTFILE:
1297 # Create ALBUMFILE, ARTISTFILE, TRACKFILE
1298 # Munge filenames as follows:
1303 # Eat control characters
1304 ALBUMFILE="$(mungefilename "$DALBUM")"
1305 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
1306 TRACKFILE="$(mungefilename "$TRACKNAME")"
1307 GENRE="$(mungegenre "$GENRE")"
1308 YEAR=${CDYEAR:-$CDYEAR}
1309 # If we want to start the tracks with a given number, we need to modify
1310 # the TRACKNUM value before evaluation
1312 # Supported variables for OUTPUTFORMAT are GENRE, YEAR, ALBUMFILE,
1313 # ARTISTFILE, TRACKFILE, and TRACKNUM.
1314 if [ "$ONETRACK" = "y" ]; then
1315 if [ "$VARIOUSARTISTS" = "y" ]; then
1316 OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
1318 OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
1321 if [ "$VARIOUSARTISTS" = "y" ]; then
1322 OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT"\")"
1324 OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT"\")"
1327 if checkerrors "tagtrack-$OUTPUT-$1"; then :; else
1328 # Once we know the specific output was successful, we can change
1329 # the OUTPUT to the value containing the container
1332 OUTPUT=$OGGOUTPUTCONTAINER
1335 OUTPUT=$FLACOUTPUTCONTAINER
1341 # Check that the directory for OUTPUTFILE exists, if it doesn't, create it
1342 OUTPUTFILEDIR="$(dirname "$OUTPUTDIR/$OUTPUTFILE")"
1345 if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
1346 # FIXME # introduce warnings?
1349 # mkdir -p shouldn't return an error if the directory already exists
1350 mkdir -p "$OUTPUTFILEDIR"
1351 run_command movetrack-$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
1352 if checkstatus movetrack-output-$OUTPUT; then :; else
1353 run_command movetrack-output-$OUTPUT true
1358 # mkdir -p shouldn't return an error if the directory already exists
1359 mkdir -p "$OUTPUTFILEDIR"
1360 run_command movetrack-$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
1361 if checkstatus movetrack-output-$OUTPUT; then :; else
1362 run_command movetrack-output-$OUTPUT true
1366 # Lets move the cue file
1367 if CUEFILE=$(checkstatus cuefile) >/dev/null ; then
1368 if [ -r "$ABCDETEMPDIR/$CUEFILE" ]; then
1369 if checkstatus movecue-$OUTPUT; then :; else
1370 # Silence the Copying output since it overlaps with encoding processes...
1371 #run_command '' vecho "Copying cue file to its destination directory..."
1372 if checkstatus onetrack >/dev/null ; then
1375 if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
1376 # We dont have the dir, since it was not created before.
1379 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
1382 # NOTE: Creating a cue file with the 3-char-extension files is to comply with
1383 # http://brianvictor.tripod.com/mp3cue.htm#details
1384 [a-z0-9][a-z0-9][a-z0-9])
1385 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
1388 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT.cue"
1392 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTFILEDIR/$CUEFILE"
1394 echo movecue-$OUTPUT >> "$ABCDETEMPDIR/status"
1403 # Create the playlist if wanted
1405 # PLAYLISTFORMAT, PLAYLISTDATAPREFIX, VAPLAYLISTFORMAT, VAPLAYLISTDATAPREFIX,
1406 # VARIOUSARTISTS, OUTPUTDIR
1409 for TMPOUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1413 OUTPUT=$OGGOUTPUTCONTAINER
1416 OUTPUT=$FLACOUTPUTCONTAINER
1422 # Create a playlist file for the playlist data to go into.
1423 # We used to wipe it out if it existed. Now we request permision if interactive.
1424 for LASTTRACK in $TRACKQUEUE; do :; done
1425 ALBUMFILE="$(mungefilename "$DALBUM")"
1426 ARTISTFILE="$(mungefilename "$DARTIST")"
1427 GENRE="$(mungegenre "$GENRE")"
1428 YEAR=${CDYEAR:-$CDYEAR}
1429 if [ "$VARIOUSARTISTS" = "y" ] ; then
1430 PLAYLISTFILE="$(eval echo "$VAPLAYLISTFORMAT")"
1432 PLAYLISTFILE="$(eval echo "$PLAYLISTFORMAT")"
1434 FINALPLAYLISTDIR="$(dirname "$OUTPUTDIR/$PLAYLISTFILE")"
1435 mkdir -p "$FINALPLAYLISTDIR"
1436 if [ -s "$OUTPUTDIR/$PLAYLISTFILE" ]; then
1437 echo -n "Erase, Append to, or Keep the existing playlist file? [e/a/k] (e): " >&2
1438 if [ "$INTERACTIVE" = "y" ]; then
1439 while [ "$DONE" != "y" ]; do
1441 case $ERASEPLAYLIST in
1442 e|E|a|A|k|K) DONE=y ;;
1450 # Once we erase the playlist, we use append to create the new one.
1451 [ "$ERASEPLAYLIST" = "e" -o "$ERASEPLAYLIST" = "E" ] && rm -f "$OUTPUTDIR/$PLAYLISTFILE" && ERASEPLAYLIST=a
1453 # The playlist does not exist, so we can safelly use append to create the new list
1456 if [ "$ERASEPLAYLIST" = "a" -o "$ERASEPLAYLIST" = "A" ]; then
1457 touch "$OUTPUTDIR/$PLAYLISTFILE"
1458 for UTRACKNUM in $TRACKQUEUE
1460 # Shares some code with do_move since the filenames have to match
1461 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
1462 getcddbinfo TRACKNAME
1464 TRACKFILE="$(mungefilename "$TRACKNAME")"
1465 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
1466 ALBUMFILE="$(mungefilename "$DALBUM")"
1467 # If we want to start the tracks with a given number, we need to modify the
1468 # TRACKNUM value before evaluation
1470 if [ "$VARIOUSARTISTS" = "y" ]; then
1471 OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT\"")"
1473 OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT\"")"
1475 if [ "$VARIOUSARTISTS" = "y" ]; then
1476 if [ "$VAPLAYLISTDATAPREFIX" ] ; then
1477 echo ${VAPLAYLISTDATAPREFIX}$OUTPUTFILE.$OUTPUT >> "$OUTPUTDIR/$PLAYLISTFILE"
1479 relpath "$PLAYLISTFILE", "$OUTPUTFILE.$OUTPUT" >> "$OUTPUTDIR/$PLAYLISTFILE"
1482 if [ "$PLAYLISTDATAPREFIX" ]; then
1483 echo ${PLAYLISTDATAPREFIX}$OUTPUTFILE.$OUTPUT >> "$OUTPUTDIR/$PLAYLISTFILE"
1485 relpath "$PLAYLISTFILE", "$OUTPUTFILE.$OUTPUT" >> "$OUTPUTDIR/$PLAYLISTFILE"
1490 ## this will convert the playlist to have CRLF line-endings, if specified
1491 ## (some hardware players insist on CRLF endings)
1492 if [ "$DOSPLAYLIST" = "y" ]; then
1493 awk '{substr("\r",""); printf "%s\r\n", $0}' "$OUTPUTDIR/$PLAYLISTFILE" > "$ABCDETEMPDIR/PLAYLISTFILE.tmp"
1494 # mv -f "$ABCDETEMPDIR/PLAYLISTFILE.tmp" "$OUTPUTDIR/$PLAYLISTFILE"
1495 cat "$ABCDETEMPDIR/PLAYLISTFILE.tmp" | sed 's/\//\\/' > "$OUTPUTDIR/$PLAYLISTFILE"
1497 echo "playlistcomplete" >> "$ABCDETEMPDIR/status"
1502 # This function reads a cuefile on stdin and writes an extended
1503 # cddb query on stdout. Any PREGAP for track 1 is properly
1504 # handled, although cue files embedded in FLAC files do not
1505 # appear to properly store the PREGAP setting. :(
1506 abcde.cue2discid () {
1511 while [ $val -gt 0 ] ; do
1512 ret=$(( $ret + ( $val % 10) ))
1513 val=$(( $val / 10 ))
1523 local first second third
1524 first=$(expr ${1} + 0 )
1525 second=$(expr ${2} + 0 )
1526 third=$(expr ${3} + 0 )
1528 echo $(( ((($first * 60) + $second) * 75) + $third ))
1538 while read line ; do
1541 TRACK) i=$(( i + 1 ))
1543 INDEX) if [ "$2" -eq 1 ] ; then
1545 START=$(( $LBA + $PREGAP + $OFFSET ))
1547 X=$(cddb_sum $(( $START / 75 )) )
1551 PREGAP) PREGAP=$(msf2lba $2)
1555 LEADOUT=$(( $4 / 588 ))
1558 LEADIN=$(( $3 / 588 ))
1567 LEADOUT=$(( $LEADOUT + $LEADIN ))
1569 LENGTH=$(( $LEADOUT/75 - $TRACK1/75 ))
1570 DISCID=$(( ( $N % 255 ) * 2**24 | $LENGTH * 2**8 | $TRACKS ))
1571 printf "%08x %i" $DISCID $TRACKS
1574 while [ $j -le $TRACKS ] ; do
1575 eval echo -n "\" \$TRACK$j\""
1578 echo " $(( $LEADOUT / 75 ))"
1582 # abcde.mkcue [--wholedisk]
1583 # This creates a cuefile directly from the extended discid information
1584 # The --wholedisk option controls whether we're ripping data from the
1585 # start of track one or from the start of the disk (usually, but not
1586 # always the same thing!)
1588 # Track one leadin/pregap (if any) handeling:
1589 # --wholedisk specified:
1592 # INDEX 01 <pregap value>
1593 # Remaining track index values unchanged from disc TOC
1595 # --wholedisk not specified
1597 # PREGAP <pregap value>
1599 # Remaining track index values offset by <pregap value>
1606 printf "$1%02i:%02i:%02i\n" $(($2/4500)) $((($2/75)%60)) $(($2%75))
1609 local MODE DISCID TRACKS
1613 if [ "$1" = --wholedisc ] ; then
1625 echo REM DISCID $DISCID
1626 echo FILE \"dummy.wav\" WAVE
1628 if [ $1 -ne 150 ] ; then
1629 if [ $MODE = PREGAP ] ; then
1637 while [ $i -le "$TRACKS" ] ; do
1638 LBA=$(( $1 - $OFFSET ))
1639 printf " TRACK %02i AUDIO\n" $i
1640 if [ $i -eq 1 -a $1 -ne 150 ] ; then
1641 if [ $MODE = PREGAP ] ; then
1642 echomsf " PREGAP " $(($OFFSET-150))
1644 echo " INDEX 00 00:00:00"
1647 echomsf " INDEX 01 " $LBA
1654 # This essentially the start of things
1657 # Query the CD to get the track info, unless the user specified -C
1658 # or we are using some actions which do not need the CDDB data at all
1659 #if [ ! X"$EXPACTIONS" = "X" ]; then
1661 #elif [ -z "$DISCID" ]; then
1662 if [ -z "$DISCID" ]; then
1663 vecho -n "Getting CD track info... "
1664 # In OSX, unmount the disc before a query
1665 if [ "$OSFLAVOUR" = "OSX" ]; then
1666 disktool -u ${CDROM#/dev/}
1668 case "$CDROMREADERSYNTAX" in
1670 if $METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" > /dev/null 2>&1 ; then
1671 case "$CUE2DISCID" in
1672 # FIXME # right now we have 2 cue2discid internal
1673 # implementations: builtin and abcde.cue2discid. Test
1674 # both of them and decide which one we want to use.
1676 #vecho "Using builtin cue2discid implementation..."
1677 CUESHEET="$(metaflac $METAFLACOPTS --export-cuesheet-to=- "$CDROM")"
1679 #TRACKS=$(echo $CUESHEET | egrep "TRACK \+[[:digit:]]\+ \+AUDIO" |wc -l)
1681 OFFSETTIMES=( $(echo "$CUESHEET" | sed -n -e's/\ *INDEX 01\ \+//p' ) )
1682 TRACKS=${#OFFSETTIMES[@]}
1684 #echo "processing offsetimes ${OFFSETTIMES[@]}"
1685 for OFFSETTIME in ${OFFSETTIMES[@]}; do
1686 OFFSETS="$OFFSETS $(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))"
1687 #OFFSETS[${#OFFSETS[*]}]=$(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))
1690 LEADOUT=$(( $(echo "$CUESHEET" | grep lead-out | get_last) / 44100 * 75 ))
1691 LEADIN=$(( $(echo "$CUESHEET" | grep lead-in | get_last) / 44100 * 75 ))
1695 #vecho "Using external python cue2discid implementation..."
1696 TRACKINFO=$($METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" | $CUE2DISCID)
1700 log error "the input flac file does not contain a cuesheet."
1705 # CDPARANOIAOUTPUT="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
1707 # if [ ! "$RET" = "0" ];then
1708 # log warning "something went wrong while querying the CD... Maybe a DATA CD?"
1711 # TRACKS="$(echo "$CDPARANOIAOUTPUT" | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d "." | tr '\n' ' ')"
1712 # CDPARANOIAAUDIOTRACKS="$TRACKS"
1714 # LEADOUT="$(echo "$CDPARANOIAOUTPUT" | egrep -o '^TOTAL[[:space:]]+([[:digit:]]+)' | get_last)"
1715 # OFFSETS="$(echo "$CDPARANOIAOUTPUT" | sed -n -e's/^ .* \([0-9]\+\) \[.*/\1/p')"
1719 case "$CDDBMETHOD" in
1720 cddb) TRACKINFO=$($CDDISCID "$CDROM") ;;
1721 # FIXME # musicbrainz needs a cleanup
1722 musicbrainz) TRACKINFO=$($MUSICBRAINZ -c "$CDROM" ) ;;
1726 # Make sure there's a CD in there by checking cd-discid's return code
1727 if [ ! "$?" = "0" ]; then
1728 if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
1729 log error "cuesheet information from the flac file could not be read."
1730 log error "Perhaps the flac file does not contain a cuesheet?."
1733 log error "CD could not be read. Perhaps there's no CD in the drive?"
1737 # In OSX, remount the disc again
1738 if [ "$OSFLAVOUR" = "OSX" ]; then
1739 disktool -m ${CDROM#/dev/}
1742 DISCID=$(echo $TRACKINFO | cut -f1 -d' ')
1744 TRACKINFO=$(cat "$WAVOUTPUTDIR/abcde.$DISCID/discid")
1747 # Get a full enumeration of tracks, sort it, and put it in the TRACKQUEUE.
1748 # This needs to be done now because a section of the resuming code will need
1751 # get the number of digits to pad TRACKNUM with - we'll use this later
1752 # a CD can only hold 99 tracks, but since we support a feature for starting
1753 # numbering the tracks from a given number, we might need to set it as a
1754 # variable for the user to define... or obtain it somehow.
1755 if [ "$PADTRACKS" = "y" ] ; then
1759 ABCDETEMPDIR="$WAVOUTPUTDIR/abcde.$(echo $TRACKINFO | cut -f1 -d' ')"
1760 if [ -z "$TRACKQUEUE" ]; then
1761 if [ ! "$STRIPDATATRACKS" = "n" ]; then
1762 case "$CDROMREADERSYNTAX" in
1764 if [ "$WEHAVEACD" = "y" ]; then
1765 vecho "Querying the CD for audio tracks..."
1766 CDPARANOIAOUTPUT="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
1768 if [ ! "$RET" = "0" ];then
1769 log warning "something went wrong while querying the CD... Maybe a DATA CD?"
1771 TRACKS="$(echo "$CDPARANOIAOUTPUT" | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d "." | tr '\n' ' ')"
1772 CDPARANOIAAUDIOTRACKS="$TRACKS"
1774 # Previous versions of abcde would store the tracks on a file, instead of the status record.
1775 if [ -f "$ABCDETEMPDIR/cdparanoia-audio-tracks" ]; then
1776 echo cdparanoia-audio-tracks=$( cat "$ABCDETEMPDIR/cdparanoia-audio-tracks" ) >> "$ABCDETEMPDIR/status"
1777 rm -f "$ABCDETEMPDIR/cdparanoia-audio-tracks"
1779 if [ -f "$ABCDETEMPDIR/status" ] && TRACKS=$(checkstatus cdparanoia-audio-tracks); then :; else
1780 TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
1784 *) TRACKS=$(echo $TRACKINFO | cut -f2 -d' ') ;;
1787 TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
1789 if echo "$TRACKS" | grep "[[:digit:]]" > /dev/null 2>&1 ;then :;else
1790 log info "The disc does not contain any tracks. Giving up..."
1793 echo -n "Grabbing entire CD - tracks: "
1794 if [ ! "$PADTRACKS" = "y" ] ; then
1795 TRACKNUMPADDING=$(echo -n $TRACKS | wc -c | tr -d ' ')
1797 TRACKS=$(printf "%0.${TRACKNUMPADDING}d" $TRACKS)
1799 while [ "$X" -ne "$TRACKS" ]
1801 X=$(printf "%0.${TRACKNUMPADDING}d" $(expr $X + 1))
1802 TRACKQUEUE=$(echo $TRACKQUEUE $X)
1806 TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
1807 # User-supplied track queue.
1808 # Weed out non-numbers, whitespace, then sort and weed out duplicates
1809 TRACKQUEUE=$(echo $TRACKQUEUE | sed 's-[^0-9 ]--g' | tr ' ' '\n' | grep -v ^$ | sort -n | uniq | tr '\n' ' ' | sed 's- $--g')
1810 # Once cleaned, obtain the highest value in the trackqueue for number padding
1811 for LASTTRACK in $TRACKQUEUE; do :; done
1812 if [ ! "$PADTRACKS" = "y" ] ; then
1813 TRACKNUMPADDING=$(echo -n $LASTTRACK | wc -c | tr -d ' ')
1815 # Now we normalize the trackqueue
1816 for TRACK in $TRACKQUEUE ; do
1817 TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${TRACK} + 0 ))
1818 PADTRACKQUEUE=$(echo $PADTRACKQUEUE $TRACKNUM)
1820 TRACKQUEUE=$PADTRACKQUEUE
1821 echo Grabbing tracks: "$TRACKQUEUE"
1824 QUEUEDTRACKS=$(echo $TRACKQUEUE | wc -w | tr -d ' ')
1826 # We have the discid, create a temp directory after it to store all the temp
1829 if [ -e "$ABCDETEMPDIR" ]; then
1830 echo -n "abcde: attempting to resume from $ABCDETEMPDIR"
1831 # It already exists, see if it's a directory
1832 if [ ! -d "$ABCDETEMPDIR" ]; then
1833 # This is a file/socket/fifo/device/etc, not a directory
1836 echo "abcde: file $ABCDETEMPDIR already exists and does not belong to abcde." >&2
1837 echo "Please investigate, remove it, and rerun abcde." >&2
1841 # It's a directory, let's see if it's owned by us
1842 if [ ! -O "$ABCDETEMPDIR" ]; then
1843 # Nope, complain and exit
1845 echo "abcde: directory $ABCDETEMPDIR already exists and is not owned by you." >&2
1846 echo "Please investigate, remove it, and rerun abcde." >&2
1850 # See if it's populated
1851 if [ ! -f "$ABCDETEMPDIR/discid" ]; then
1852 # Wipe and start fresh
1853 echo "abcde: $ABCDETEMPDIR/discid not found. Abcde must remove and recreate" >&2
1854 echo -n "this directory to continue. Continue? [y/n] (n)" >&2
1855 if [ "$INTERACTIVE" = "y" ]; then
1861 if [ "$ANSWER" != "y" ]; then
1864 rm -rf "$ABCDETEMPDIR" || exit 1
1865 mkdir -p "$ABCDETEMPDIR"
1866 if [ "$?" -gt "0" ]; then
1867 # Directory already exists or could not be created
1868 echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
1872 # Everything is fine. Check for ^encodetracklocation-
1873 # and encode-output entries in the status file and
1874 # remove them. These are not relevant across sessions.
1875 if [ -f "$ABCDETEMPDIR/status" ]; then
1876 mv "$ABCDETEMPDIR/status" "$ABCDETEMPDIR/status.old"
1877 grep -v ^encodetracklocation- < "$ABCDETEMPDIR/status.old" \
1878 | grep -v ^encode-output > "$ABCDETEMPDIR/status"
1880 # Remove old error messages
1881 if [ -f "$ABCDETEMPDIR/errors" ]; then
1882 rm -f "$ABCDETEMPDIR/errors"
1886 # We are starting from scratch
1887 mkdir -p "$ABCDETEMPDIR"
1888 if [ "$?" -gt "0" ]; then
1889 # Directory already exists or could not be created
1890 echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
1893 cat /dev/null > "$ABCDETEMPDIR/status"
1894 # Store the abcde version in the status file.
1895 echo "abcde-version=$VERSION" >> "$ABCDETEMPDIR/status"
1897 if [ X"$DOCUE" = "Xy" -a X"$WEHAVEACD" = "Xy" ]; then
1898 if checkstatus cuefile > /dev/null 2>&1 ; then :; else
1899 CUEFILE=cue-$(echo "$TRACKINFO" | cut -f1 -d' ').txt
1900 vecho "Creating cue file..."
1901 case $CDROMREADERSYNTAX in
1903 if $METAFLAC --export-cuesheet-to=- "$CDROM" > "$ABCDETEMPDIR/$CUEFILE"; then
1904 echo cuefile=$CUEFILE >> "$ABCDETEMPDIR/status"
1906 log warning "the input flac file does not contain a cuesheet."
1910 if $CUEREADER $CUEREADEROPTS > "$ABCDETEMPDIR/$CUEFILE"; then
1911 echo cuefile=$CUEFILE >> "$ABCDETEMPDIR/status"
1913 log warning "reading the CUE sheet is still considered experimental"
1914 log warning "and there was a problem with the CD reading. abcde will continue,"
1915 log warning "but consider reporting the problem to the abcde author"
1921 # If we got the CDPARANOIA status and it is not recorded, save it now
1922 if [ -n "$CDPARANOIAAUDIOTRACKS" ]; then
1923 if checkstatus cdparanoia-audio-tracks > /dev/null 2>&1; then :; else
1924 echo cdparanoia-audio-tracks=$CDPARANOIAAUDIOTRACKS >> "$ABCDETEMPDIR/status"
1928 # Create the discid file
1929 echo "$TRACKINFO" > "$ABCDETEMPDIR/discid"
1930 if checkstatus cddbmethod > /dev/null 2>&1 ; then :; else
1931 echo "cddbmethod=$CDDBMETHOD" >> "$ABCDETEMPDIR/status"
1936 # Create a proper CUE file based on the CUE file we created before.
1939 if CUEFILE_IN="$ABCDETEMPDIR"/$(checkstatus cuefile); then
1940 CUEFILE_OUT=$CUEFILE_IN.out
1941 ### FIXME ### checkstatus cddb
1942 if [ -e "$CDDBDATA" ]; then
1943 vecho "Adding metadata to the cue file..."
1944 # FIXME It doesn't preserve spaces! Why?
1945 # FIXME parse $track into PERFORMER and TITLE - abcde already has code for this?
1947 echo "PERFORMER \"$DARTIST\"" >> "$CUEFILE_OUT"
1948 echo "TITLE \"$DALBUM\"" >> "$CUEFILE_OUT"
1949 # Set IFS to <newline> to prevent read from swallowing spaces and tabs
1953 cat "$CUEFILE_IN" | while read line
1955 if echo "$line" | grep "INDEX 01" > /dev/null 2>&1 ; then
1956 # FIXME # Possible patch: remove the line above, uncomment the 2 lines below.
1957 # echo "$line" >> "$CUEFILE_OUT"
1958 # if echo "$line" | grep "^[[:space:]]*TRACK" > /dev/null 2>&1 ; then
1959 eval track="\$TRACK$n"
1961 echo " TITLE \"$track\"" >> "$CUEFILE_OUT"
1963 # FIXME # If the lines above are uncommented, remove the line below.
1964 echo "$line" >> "$CUEFILE_OUT"
1967 mv "$CUEFILE_OUT" "$CUEFILE_IN"
1968 echo "cleancuefile" >> "$ABCDETEMPDIR/status"
1974 # Parses a CDDB file and outputs the title and the track names.
1975 # Variables: CDDBFILE
1979 # List out disc title/author and contents
1980 if [ "$ONETRACK" = "y" ]; then
1981 vecho "ONETRACK mode selected: displaying only the title of the CD..."
1983 echo "---- $(grep DTITLE "${CDDBPARSEFILE}" | cut '-d=' -f2- | tr -d \\r\\n ) ----"
1984 if [ X"$SHOWCDDBYEAR" = "Xy" ]; then
1985 PARSEDYEAR=$(grep DYEAR "${CDDBPARSEFILE}" | cut '-d=' -f2-)
1986 if [ ! X"$PARSEDYEAR" = "X" ]; then
1987 echo "Year: $PARSEDYEAR"
1990 if [ X"$SHOWCDDBGENRE" = "Xy" ]; then
1991 PARSEDGENRE=$(grep DGENRE "${CDDBPARSEFILE}" | cut '-d=' -f2-)
1992 if [ ! X"$PARSEDGENRE" = "X" ]; then
1993 echo "Genre: $PARSEDGENRE"
1996 if [ ! "$ONETRACK" = "y" ]; then
1997 for TRACK in $(f_seq_row 1 $TRACKS)
1999 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "${CDDBPARSEFILE}" | cut -f2- -d= | tr -d \\r\\n)"
2005 # Check for a local CDDB file, and report success
2008 if checkstatus cddb-readcomplete && checkstatus cddb-choice >/dev/null; then :; else
2010 CDDBLOCALSTATUS="notfound"
2011 CDDBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
2014 if [ "$CDDBLOCALRECURSIVE" = "y" ]; then
2015 CDDBLOCALRESULTS="$(find ${CDDBLOCALDIR} -name "${CDDBDISCID}" -type f 2> /dev/null)"
2016 if [ ! "${CDDBLOCALRESULTS}" = "" ]; then
2017 if (( $(echo "${CDDBLOCALRESULTS}" | wc -l) == 1 )); then
2018 CDDBLOCALFILE="${CDDBLOCALRESULTS}"
2019 CDDBLOCALMATCH=single
2020 elif (( $(echo "${CDDBLOCALRESULTS}" | wc -l) > 1 )); then
2021 CDDBLOCALMATCH=multiple
2026 elif [ "$CDDBLOCALMATCH" = "none" ] && [ -r "${CDDBLOCALDIR}/${CDDBDISCID}" ]; then
2027 CDDBLOCALFILE="${CDDBLOCALDIR}/${CDDBDISCID}"
2028 CDDBLOCALMATCH=single
2033 # If the user has selected to check a local CDDB repo, we proceed with it
2034 case $CDDBLOCALMATCH in
2036 echo "Processing multiple matching CDDB entries..." > "$ABCDETEMPDIR/cddblocalchoices"
2038 echo "$CDDBLOCALRESULTS" | while read RESULT ; do
2040 # List out disc title/author and contents
2041 CDDBLOCALREAD="$ABCDETEMPDIR/cddblocalread.$X"
2042 cat "$RESULT" > "${CDDBLOCALREAD}"
2045 do_cddbparse "${CDDBLOCALREAD}"
2047 ##FIXME## QUICK HACK !!!!
2048 if [ ! "$INTERACTIVE" = "y" ]; then break ; fi
2049 } >> "$ABCDETEMPDIR/cddblocalchoices"
2051 if [ $(cat "$ABCDETEMPDIR/cddblocalchoices" | wc -l) -ge 24 ] && [ "$INTERACTIVE" = "y" ]; then
2052 page "$ABCDETEMPDIR/cddblocalchoices"
2054 # It's all going to fit in one page, cat it
2055 cat "$ABCDETEMPDIR/cddblocalchoices" >&2
2057 CDDBLOCALCHOICES=$( echo "$CDDBLOCALRESULTS" | wc -l )
2058 # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
2059 CDDBLOCALCHOICENUM=-1
2060 if [ "$INTERACTIVE" = "y" ]; then
2061 while [ $CDDBLOCALCHOICENUM -lt 0 ] || [ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; do
2062 echo -n "Locally cached CDDB entries found. Which one would you like to use (0 for none)? [0-$CDDBLOCALCHOICES]: " >&2
2063 read CDDBLOCALCHOICE
2064 [ x"$CDDBLOCALCHOICE" = "x" ] && CDDBLOCALCHOICE="1"
2065 # FIXME # Introduce diff's
2066 if echo $CDDBLOCALCHOICE | egrep "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2067 diffentries cddblocalread "$CDDBLOCALCHOICES" "$CDDBLOCALCHOICE"
2068 elif echo $CDDBLOCALCHOICE | egrep "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2069 # Make sure we get a valid choice
2070 CDDBLOCALCHOICENUM=$(echo $CDDBLOCALCHOICE | xargs printf %d 2>/dev/null)
2071 if [ $CDDBLOCALCHOICENUM -lt 0 ] || [ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; then
2072 echo "Invalid selection. Please choose a number between 0 and $CDDBLOCALCHOICES." >&2
2078 #echo "Selected ..."
2080 CDDBLOCALCHOICENUM=1
2082 if [ ! "$CDDBLOCALCHOICENUM" = "0" ]; then
2083 #echo "Using local copy of CDDB data"
2084 echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
2085 cat "$ABCDETEMPDIR/cddblocalread.$CDDBLOCALCHOICENUM" >> "$ABCDETEMPDIR/cddbread.1"
2086 echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
2087 echo cddb-readcomplete >> "$ABCDETEMPDIR/status"
2088 do_cddbparse "$ABCDETEMPDIR/cddbread.1" > "$ABCDETEMPDIR/cddbchoices"
2089 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2090 CDDBLOCALSTATUS="found"
2092 #echo "Not using local copy of CDDB data"
2093 CDDBLOCALSTATUS="notfound"
2097 # List out disc title/author and contents
2098 do_cddbparse "${CDDBLOCALFILE}"
2099 #if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
2100 # echo -n "Embedded cuesheet entry found, use it? [y/n] (y): " >&2
2102 echo -n "Locally cached CDDB entry found, use it? [y/n] (y): " >&2
2104 if [ "$INTERACTIVE" = "y" ]; then
2106 while [ "$USELOCALRESP" != "y" ] && [ "$USELOCALRESP" != "n" ] && [ "$USELOCALRESP" != "" ] ; do
2107 echo -n 'Invalid selection. Please answer "y" or "n": ' >&2
2110 [ x"$USELOCALRESP" = "x" ] && USELOCALRESP="y"
2114 if [ "$USELOCALRESP" = "y" ]; then
2115 #echo "Using local copy of CDDB data"
2116 echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
2117 cat "${CDDBLOCALFILE}" >> "$ABCDETEMPDIR/cddbread.1"
2118 echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
2119 echo cddb-readcomplete >> "$ABCDETEMPDIR/status"
2120 do_cddbparse "${CDDBLOCALFILE}" > "$ABCDETEMPDIR/cddbchoices"
2121 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2122 CDDBLOCALSTATUS="single"
2124 #echo "Not using local copy of CDDB data"
2125 CDDBLOCALSTATUS="notfound"
2129 CDDBLOCALSTATUS="notfound"
2135 do_musicbrainzstat ()
2142 # Use MBE_TOCGetCDIndexId on a perl query
2149 # Perform CDDB protocol version check if it hasn't already been done
2150 if checkstatus cddb-statcomplete; then :; else
2151 if [ "$CDDBAVAIL" = "n" ]; then
2153 echo 503 > "$ABCDETEMPDIR/cddbstat"
2156 CDDBUSER=$(echo $HELLOINFO | cut -f1 -d'@')
2157 CDDBHOST=$(echo $HELLOINFO | cut -f2- -d'@')
2158 while test $rc -eq 1 -a $CDDBPROTO -ge 3; do
2159 vecho "Checking CDDB server status..."
2160 $CDDBTOOL stat $CDDBURL $CDDBUSER $CDDBHOST $CDDBPROTO > "$ABCDETEMPDIR/cddbstat"
2161 RESPONSECODE=$(head -n 1 "$ABCDETEMPDIR/cddbstat" | cut -f1 -d' ')
2162 case "$RESPONSECODE" in
2163 210) # 210 OK, status information follows (until terminating `.')
2166 501|*) # 501 Illegal CDDB protocol level: <n>.
2167 CDDBPROTO=`expr $CDDBPROTO - 1`
2171 if test $rc -eq 1; then
2175 echo cddb-statcomplete >> "$ABCDETEMPDIR/status"
2183 CDDBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
2184 CDDBLOCALFILE="${CDDBLOCALDIR}/${CDDBDISCID}"
2186 # Perform CDDB query if it hasn't already been done
2187 if checkstatus cddb-querycomplete; then :; else
2188 if [ "$CDDBAVAIL" = "n" ]; then
2190 echo 503 > "$ABCDETEMPDIR/cddbquery"
2191 # The default CDDBLOCALSTATUS is "notfound"
2192 # This part will be triggered if the user CDDB repo does not
2193 # contain the entry, or if we are not trying to use the repo.
2195 vecho "Querying the CDDB server..."
2196 CDDBUSER=$(echo $HELLOINFO | cut -f1 -d'@')
2197 CDDBHOST=$(echo $HELLOINFO | cut -f2- -d'@')
2198 $CDDBTOOL query $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $TRACKINFO > "$ABCDETEMPDIR/cddbquery"
2204 # no match found in database,
2205 # wget/fetch error, or user requested not to use CDDB
2206 # Make up an error code (503) that abcde
2207 # will recognize in do_cddbread
2208 # and compensate by making a template
2209 echo 503 > "$ABCDETEMPDIR/cddbquery"
2211 *) # strange and unknown error
2212 echo ERRORCODE=$ERRORCODE
2213 echo "abcde: $CDDBTOOL returned unknown error code"
2217 echo cddb-querycomplete >> "$ABCDETEMPDIR/status"
2224 # If it's not to be used, generate a template.
2225 # Then, display it (or them) and let the user choose/edit it
2226 if checkstatus cddb-readcomplete; then :; else
2227 vecho "Obtaining CDDB results..."
2228 # If CDDB is to be used, interpret the query results and read all
2229 # the available entries.
2230 rm -f "$ABCDETEMPDIR/cddbchoices"
2231 CDDBCHOICES=1 # Overridden by multiple matches
2232 RESPONSECODE=$(head -n 1 "$ABCDETEMPDIR/cddbquery" | cut -f1 -d' ')
2233 case "$RESPONSECODE" in
2235 # One exact match, retrieve it
2236 # 200 [section] [discid] [artist] / [title]
2237 if checkstatus cddb-read-1-complete; then :; else
2238 echo -n "Retrieving 1 CDDB match..." >> "$ABCDETEMPDIR/cddbchoices"
2239 $CDDBTOOL read $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $(cut -f2,3 -d' ' "$ABCDETEMPDIR/cddbquery") > "$ABCDETEMPDIR/cddbread.1"
2240 echo "done." >> "$ABCDETEMPDIR/cddbchoices"
2241 echo cddb-read-1-complete >> "$ABCDETEMPDIR/status"
2242 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2244 # List out disc title/author and contents
2245 echo ---- "$(cut '-d ' -f4- "$ABCDETEMPDIR/cddbquery")" ---- >> "$ABCDETEMPDIR/cddbchoices"
2246 for TRACK in $(f_seq_row 1 $TRACKS)
2248 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2250 echo >> "$ABCDETEMPDIR/cddbchoices"
2254 case "$RESPONSECODE" in
2255 202) echo "No CDDB match." >> "$ABCDETEMPDIR/cddbchoices" ;;
2256 403|409) echo "CDDB entry is corrupt, or the handshake failed." >> "$ABCDETEMPDIR/cddbchoices" ;;
2257 503) echo "CDDB unavailable." >> "$ABCDETEMPDIR/cddbchoices" ;;
2259 $CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2260 # List out disc title/author and contents of template
2261 echo ---- Unknown Artist / Unknown Album ---- >> "$ABCDETEMPDIR/cddbchoices"
2263 for TRACK in $(f_seq_row 1 $TRACKS)
2265 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.0" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2267 echo >> "$ABCDETEMPDIR/cddbchoices"
2268 echo cddb-read-0-complete >> "$ABCDETEMPDIR/status"
2269 echo cddb-choice=0 >> "$ABCDETEMPDIR/status"
2272 # Multiple exact, (possibly multiple) inexact matches
2274 if [ "$RESPONSECODE" = "211" ]; then IN=in; fi
2275 if [ "$(wc -l < "$ABCDETEMPDIR/cddbquery" | tr -d ' ')" -eq 3 ]; then
2276 echo "One ${IN}exact match:" >> "$ABCDETEMPDIR/cddbchoices"
2277 tail -n +2 "$ABCDETEMPDIR/cddbquery" | head -n 1 >> "$ABCDETEMPDIR/cddbchoices"
2278 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2280 echo "Multiple ${IN}exact matches:" >> "$ABCDETEMPDIR/cddbchoices"
2282 vecho -n "Retrieving multiple matches... "
2283 grep -v ^[.]$ "$ABCDETEMPDIR/cddbquery" | ( X=0
2284 read DISCINFO # eat top line
2288 if checkstatus cddb-read-$X-complete; then :; else
2289 $CDDBTOOL read $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $(echo $DISCINFO | cut -f1,2 -d' ') > "$ABCDETEMPDIR/cddbread.$X"
2290 echo cddb-read-$X-complete >> "$ABCDETEMPDIR/status"
2292 # List out disc title/author and contents
2293 echo \#$X: ---- "$DISCINFO" ---- >> "$ABCDETEMPDIR/cddbchoices"
2294 for TRACK in $(f_seq_row 1 $TRACKS)
2296 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.$X" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2298 echo >> "$ABCDETEMPDIR/cddbchoices"
2301 CDDBCHOICES=$(expr $(cat "$ABCDETEMPDIR/cddbquery" | wc -l) - 2)
2305 for TRACK in $(f_seq_row 1 $TRACKS)
2307 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2309 echo >> "$ABCDETEMPDIR/cddbchoices"
2310 echo cddb-read-1-complete >> "$ABCDETEMPDIR/status"
2311 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2314 echo "cddb-readcomplete" >> "$ABCDETEMPDIR/status"
2321 if checkstatus cddb-edit >/dev/null; then
2322 CDDBDATA="$ABCDETEMPDIR/cddbread.$(checkstatus cddb-choice)"
2323 VARIOUSARTISTS="$(checkstatus variousartists)"
2324 VARIOUSARTISTSTYLE="$(checkstatus variousartiststyle)"
2327 if [ "$INTERACTIVE" = "y" ]; then
2328 # We should show the CDDB results both when we are not using the local CDDB repo
2329 # or when we are using it but we could not find a proper match
2330 if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] || [ ! "$CDDBUSELOCAL" = "y" ]; then
2331 # Display the $ABCDETEMPDIR/cddbchoices file created above
2332 # Pick a pager so that if the tracks overflow the screen the user can still view everything
2333 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2334 CDDBCHOICES=$(expr $(cat "$ABCDETEMPDIR/cddbquery" | wc -l) - 2)
2335 CHOICE=$(checkstatus cddb-choice)
2336 if [ -n "$CHOICE" ] ; then
2337 case $CDDBCHOICES in
2338 -1) if head -1 "$ABCDETEMPDIR/cddbquery" | grep "^$" > /dev/null 2>&1 ; then
2339 log error "CDDB query failed!"
2342 cat "$ABCDETEMPDIR/cddbchoices"
2345 1) cat "$ABCDETEMPDIR/cddbchoices" ;;
2347 echo "Selected: #$CHOICE"
2348 do_cddbparse "$ABCDETEMPDIR/cddbread.$CHOICE"
2352 # The user has a choice to make, display the info in a pager if necessary
2353 if [ $(cat "$ABCDETEMPDIR/cddbchoices" | wc -l) -ge 24 ]; then
2354 page "$ABCDETEMPDIR/cddbchoices"
2356 # It's all going to fit in one page, cat it
2357 cat "$ABCDETEMPDIR/cddbchoices" >&2
2361 # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
2363 # I'll take CDDB read #3 for $400, Alex
2364 while [ $CDCHOICENUM -lt 0 ] || [ $CDCHOICENUM -gt $CDDBCHOICES ]; do
2365 echo -n "Which entry would you like abcde to use (0 for none)? [0-$CDDBCHOICES]: " >&2
2367 [ X"$CDDBCHOICE" = "X" ] && CDDBCHOICE=1
2368 if echo $CDDBCHOICE | egrep "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2369 if [ ! X"$DIFF" = "X" ]; then
2370 PARSECHOICE1=$(echo $CDDBCHOICE | cut -d"," -f1 | xargs printf %d 2>/dev/null)
2371 PARSECHOICE2=$(echo $CDDBCHOICE | cut -d"," -f2 | xargs printf %d 2>/dev/null)
2372 if [ $PARSECHOICE1 -lt 1 ] || [ $PARSECHOICE1 -gt $CDDBCHOICES ] || \
2373 [ $PARSECHOICE2 -lt 1 ] || [ $PARSECHOICE2 -gt $CDDBCHOICES ] || \
2374 [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
2375 echo "Invalid diff range. Please select two coma-separated numbers between 1 and $CDDBCHOICES" >&2
2377 # We parse the 2 choices to diff, store them in temporary files and diff them.
2378 for PARSECHOICE in $(echo $CDDBCHOICE | tr , \ ); do
2379 do_cddbparse "$ABCDETEMPDIR/cddbread.$PARSECHOICE" > "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE"
2381 echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/cddbread.diff"
2382 $DIFF $DIFFOPTS "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/cddbread.diff"
2383 if [ $(cat "$ABCDETEMPDIR/cddbread.diff" | wc -l) -ge 24 ]; then
2384 page "$ABCDETEMPDIR/cddbread.diff"
2386 cat "$ABCDETEMPDIR/cddbread.diff" >&2
2390 echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBCHOICES." >&2
2392 elif echo $CDDBCHOICE | egrep "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2393 # Make sure we get a valid choice
2394 CDCHOICENUM=$(echo $CDDBCHOICE | xargs printf %d 2>/dev/null)
2395 if [ $CDCHOICENUM -lt 0 ] || [ $CDCHOICENUM -gt $CDDBCHOICES ]; then
2396 echo "Invalid selection. Please choose a number between 0 and $CDDBCHOICES." >&2
2400 if [ "$CDCHOICENUM" = "0" ]; then
2401 vecho "Creating empty CDDB template..."
2403 $CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2405 echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
2406 do_cddbparse "$ABCDETEMPDIR/cddbread.$CDCHOICENUM"
2408 echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
2412 # We need some code to show the selected option when local repository is selected and we have found a match
2413 vecho "Using cached CDDB match..." >&2
2414 # Display the $ABCDETEMPDIR/cddbchoices file created above
2415 # Pick a pager so that if the tracks overflow the screen the user can still view everything
2416 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2417 CDDBCHOICES=$(expr $(cat "$ABCDETEMPDIR/cddbquery" | wc -l) - 2)
2418 CHOICE=$(checkstatus cddb-choice)
2419 if [ "$USELOCALRESP" = "y" ]; then :; else
2420 if [ -n "$CHOICE" ] ; then
2421 case $CDDBCHOICES in
2424 echo "Selected template."
2426 1) cat "$ABCDETEMPDIR/cddbchoices" ;;
2428 echo "Selected: #$CHOICE"
2429 do_cddbparse "$ABCDETEMPDIR/cddbread.$CHOICE"
2437 # We're noninteractive - pick the first choice.
2438 # But in case we run a previous instance and selected a choice, use it.
2439 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2440 # Show the choice if we are not using the locally stored one
2441 # or when the local search failed to find a match.
2442 PREVIOUSCHOICE=$(checkstatus cddb-choice)
2443 if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] || [ ! "$CDDBUSELOCAL" = "y" ]; then
2444 #if [ "$PREVIOUSCHOICE" ]; then
2445 cat "$ABCDETEMPDIR/cddbchoices"
2448 if [ ! -z "$PREVIOUSCHOICE" ] ; then
2449 CDCHOICENUM=$PREVIOUSCHOICE
2452 echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
2454 echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
2459 if checkstatus cddb-choice >/dev/null; then :; else
2460 echo "abcde: internal error: cddb-choice not recorded." >&2
2463 CDDBDATA="$ABCDETEMPDIR/cddbread.$(checkstatus cddb-choice)"
2464 echo -n "Edit selected CDDB data? [y/n] (" >&2
2465 if [ "$INTERACTIVE" = "y" ]; then
2466 if [ "$UNKNOWNDISK" = "y" ]; then
2469 [ "$EDITCDDB" != "n" ] && EDITCDDB=y
2478 if [ "$EDITCDDB" = "y" ]; then
2479 CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d " " -f 1);
2481 # Use the debian sensible-editor wrapper to pick the editor that the
2482 # user has requested via their $EDITOR environment variable
2483 if [ -x "/usr/bin/sensible-editor" ]; then
2484 /usr/bin/sensible-editor "$CDDBDATA"
2485 elif [ -n "$EDITOR" ]; then
2486 if [ -x $(which "${EDITOR%%\ *}") ]; then
2487 # That failed, try to load the preferred editor, starting
2488 # with their EDITOR variable
2489 eval $(echo "$EDITOR") \"$CDDBDATA\"
2491 # If that fails, check for a vi
2492 elif which vi >/dev/null 2>&1; then
2494 elif [ -x /usr/bin/vim ]; then
2495 /usr/bin/vim "$CDDBDATA"
2496 elif [ -x /usr/bin/vi ]; then
2497 /usr/bin/vi "$CDDBDATA"
2498 elif [ -x /bin/vi ]; then
2500 # nano should be on all (modern, i.e., sarge) debian systems
2501 elif which nano >/dev/null 2>&1 ; then
2503 elif [ -x /usr/bin/nano ]; then
2504 /usr/bin/nano "$CDDBDATA"
2505 # mg should be on all OpenBSD systems
2506 elif which mg >/dev/null 2>&1 ; then
2508 elif [ -x /usr/bin/mg ]; then
2509 /usr/bin/mg "$CDDBDATA"
2512 log warning "no editor available. Check your EDITOR environment variable."
2514 # delete editor backup file if it exists
2515 if [ -w "$CDDBDATA~" ]; then
2520 # Some heuristics first. Look at Disc Title, and if it starts with
2521 # "Various", then we'll assume Various Artists
2522 if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
2523 echo "Looks like a Multi-Artist CD" >&2
2526 echo -n "Is the CD multi-artist? [y/n] (n): " >&2
2527 if [ "$INTERACTIVE" = "y" ]; then
2534 if [ "$VARIOUSARTISTS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
2537 # Need NUMTRACKS before cddb-tool will return it:
2538 NUMTRACKS=$(egrep '^TTITLE[0-9]+=' "$CDDBDATA" | wc -l)
2539 if [ "$(grep -c "^TTITLE.*\/" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2540 # More than 1/2 tracks contain a "/", so guess forward
2542 elif [ "$(grep -c "^TTITLE.*\-" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2543 # More than 1/2 contain a "-", so guess forward-dash
2545 elif [ "$(grep -c "^TTITLE.*(.*)" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2546 # More than 1/2 contain something in parens, so guess trailing-paren
2550 echo "1) Artist / Title" >&2
2551 echo "2) Artist - Title" >&2
2552 echo "3) Title / Artist" >&2
2553 echo "4) Title - Artist" >&2
2554 echo "5) Artist: Title" >&2
2555 echo "6) Title (Artist)" >&2
2556 echo "7) This is a single-artist CD" >&2
2557 echo -n "Which style of multiple artist entries is it? [1-7] ($DEFAULTSTYLE): " >&2
2558 if [ "$INTERACTIVE" = "y" ]; then
2559 read VARIOUSARTISTSTYLE
2561 echo $DEFAULTSTYLE >&2
2562 VARIOUSARTISTSTYLE=$DEFAULTSTYLE
2564 VARIOUSARTISTSTYLE=$(echo 0$VARIOUSARTISTSTYLE | xargs printf %d)
2565 # If they press Enter, then the default style (0) was chosen
2566 while [ $VARIOUSARTISTSTYLE -lt 0 ] || [ $VARIOUSARTISTSTYLE -gt 7 ]; do
2567 echo "Invalid selection. Please choose a number between 1 and 7."
2568 echo -n "Selection [1-7]: "
2569 read VARIOUSARTISTSTYLE
2570 VARIOUSARTISTSTYLE=$(echo 0$VARIOUSARTISTSTYLE | xargs printf %d)
2572 if [ "$VARIOUSARTISTSTYLE" = "0" ]; then
2573 VARIOUSARTISTSTYLE=$DEFAULTSTYLE
2575 vecho "Selected: $VARIOUSARTISTSTYLE"
2576 case "$VARIOUSARTISTSTYLE" in
2578 VARIOUSARTISTSTYLE=forward
2581 VARIOUSARTISTSTYLE=forward-dash
2584 VARIOUSARTISTSTYLE=reverse
2587 VARIOUSARTISTSTYLE=reverse-dash
2590 VARIOUSARTISTSTYLE=colon
2593 VARIOUSARTISTSTYLE=trailing-paren
2601 echo "variousartists=$VARIOUSARTISTS" >> "$ABCDETEMPDIR/status"
2602 echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
2604 if [ "$EDITCDDB" = "y" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
2605 if [ "$CDDBDATAMD5SUM" != "" ] && [ "$CDDBDATAMD5SUM" != "$($MD5SUM "$CDDBDATA" | cut -d " " -f 1)" ]; then
2606 # This works but does not have the necessary error checking
2607 # yet. If you are familiar with the CDDB spec
2608 # (see http://www.freedb.org/src/latest/DBFORMAT)
2609 # and can create an error-free entry on your own, then put
2610 # UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE=y in your
2611 # abcde.conf to enable it. Put CDDBSUBMIT=email@address in
2612 # your abcde.conf to change the email address submissions are
2615 # submit the modified file, if they want
2616 if [ "$NOSUBMIT" != "y" ]; then
2617 echo -n "Do you want to submit this entry to $CDDBSUBMIT? [y/n] (n): "
2619 while [ "$YESNO" != "y" ] && [ "$YESNO" != "n" ] && [ "$YESNO" != "Y" ] && \
2620 [ "$YESNO" != "N" ] && [ "$YESNO" != "" ]
2622 echo -n 'Invalid selection. Please answer "y" or "n": '
2625 if [ "$YESNO" = "y" ] || [ "$YESNO" = "Y" ]; then
2626 echo -n "Sending..."
2627 $CDDBTOOL send "$CDDBDATA" $CDDBSUBMIT
2634 # User CDDBLOCALPOLICY to find out if we store the file or not...
2635 # Cache edited CDDB entry in the user's cddb dir
2636 if [ "$CDDBCOPYLOCAL" = "y" ]; then
2637 # Make sure the cache directory exists
2638 mkdir -p $CDDBLOCALDIR
2639 cat "$CDDBDATA" | tail -n $(expr $(cat "$CDDBDATA" | wc -l ) - 1 ) > ${CDDBLOCALDIR}/$(echo "$TRACKINFO" | cut -d' ' -f1)
2642 echo "cddb-edit" >> "$ABCDETEMPDIR/status"
2645 # do_cdread [tracknumber]
2646 # do_cdread onetrack [firsttrack] [lasttrack]
2650 # The commands here don't go through run_command because they're never supposed to be silenced
2651 # return codes need to be doublechecked anyway, however
2652 if [ "$1" = "onetrack" ]; then
2653 # FIXME # Add the possibility of grabbing ranges of tracks in onetrack
2654 # FIXME # Until then, we grab the whole CD in one track, no matter what
2656 # We need the first and last track for cdda2wav
2658 LASTTRACK=$(expr $3 + 0)
2659 UTRACKNUM=$FIRSTTRACK
2660 case "$CDROMREADERSYNTAX" in
2661 flac) READTRACKNUMS="$FIRSTTRACK.1-$(($LASTTRACK + 1)).0" ;;
2664 # Add a variable to check if tracks are provided in command line and if not, use "0-" to rip the tracks
2665 READTRACKNUMS="$FIRSTTRACK-$LASTTRACK" ;;
2666 cdda2wav) READTRACKNUMS="$FIRSTTRACK+$LASTTRACK" ;;
2667 *) echo "abcde error: $CDROMREADERSYNTAX does not support ONETRACK mode"
2673 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
2674 if [ "$USEPIPES" = "y" ]; then
2675 TEMPARG="PIPERIPPER_$CDROMREADERSYNTAX"
2676 FILEARG="$( eval echo "\$$TEMPARG" )"
2678 PIPE_MESSAGE="and encoding "
2680 WAVDATA="$ABCDETEMPDIR/track$UTRACKNUM.wav"
2681 case "$CDROMREADERSYNTAX" in
2682 ## FIXME ## Find the cases for dagrab and flac, to avoid exceptions
2684 FILEARG="--output-name=$WAVDATA"
2687 FILEARG="-f $WAVDATA"
2695 if [ "$1" = "onetrack" ]; then
2696 echo "Grabbing ${PIPE_MESSAGE}tracks $UTRACKNUM - $LASTTRACK as one track ..." >&2
2698 if [ -r "$CDDBDATA" ]; then
2699 getcddbinfo TRACKNAME
2700 echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM: $TRACKNAME..." >&2
2702 echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM..." >&2
2705 case "$CDROMREADERSYNTAX" in
2706 ### FIXME ### use an exception for flac, since it uses -o
2707 ### FIXME ### Shall we just use -o $FILEARG ??
2709 # Avoid problems wit math expressions by unpadding the given UTRACKNUM
2710 STRIPTRACKNUM=$(expr $UTRACKNUM + 0)
2711 nice $READNICE $FLAC -d -f --cue=${READTRACKNUMS:-$STRIPTRACKNUM.1-$(($STRIPTRACKNUM + 1)).0} "$FILEARG" "$CDROM" ;;
2713 nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" $REDIR ;;
2715 if [ "$OSFLAVOUR" = "OSX" ] ; then
2716 # Hei, we have to unmount the device before running anything like cdda2wav in OSX
2717 disktool -u ${CDROM#/dev/} 0
2718 # Also, in OSX the cdrom device for cdda2wav changes...
2719 CDDA2WAVCDROM="IODVDServices"
2720 elif [ "$OSFLAVOUR" = "FBSD" ] ; then
2721 CDDA2WAVCDROM="$CDROMID"
2723 if [ "$CDROMID" = "" ]; then
2724 CDDA2WAVCDROM="$CDROM"
2726 CDDA2WAVCDROM="$CDROMID"
2729 nice $READNICE $CDROMREADER -D $CDDA2WAVCDROM -t ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" $REDIR
2731 ## FIXME ## We have an exception for dagrab, since it uses -f
2732 ## FIXME ## Shall we just use -f $FILEARG ??
2733 dagrab) nice $READNICE $CDROMREADER -d "$CDROM" -v $UTRACKNUM "$FILEARG" $REDIR
2736 # Find the track's mounted path
2737 REALTRACKNUM=$(expr $UTRACKNUM + 0)
2738 FILEPATH=$(mount | grep "$CDROM on" | sed 's/^[^ ]* on \(.*\) (.*/\1/')
2739 FILEPATH=$(find "$FILEPATH" | grep "/$REALTRACKNUM ");
2740 # If the file exists, copy it
2741 if [ -e "$FILEPATH" ] ; then
2742 nice $READNICE $CDROMREADER "$FILEPATH" "$FILEARG" $REDIR
2746 debug) nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -w $UTRACKNUM-[:1] "$FILEARG" $REDIR
2750 # If we get some error or we get some missing wav
2751 # (as long as we dont use pipes)
2752 if [ "$RETURN" != "0" -o \( ! -s "$WAVDATA" -a X"$USEPIPES" != "Xy" \) ]; then
2753 # Thank goodness errors is only machine-parseable up to the
2754 # first colon, otherwise this woulda sucked
2755 if [ "$RETURN" = "0" -a ! -s "$WAVDATA" ]; then
2756 RETURN=73 # fake a return code as cdparanoia return 0 also on aborted reads
2758 if [ "$USEPIPES" = "y" ]; then
2759 echo "readencodetrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
2761 echo "readtrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
2765 if [ "$USEPIPES" = "y" ]; then
2766 echo readencodetrack-$UTRACKNUM >> "$ABCDETEMPDIR/status"
2768 echo readtrack-$UTRACKNUM >> "$ABCDETEMPDIR/status"
2770 if [ "$1" = "onetrack" ]; then
2771 echo onetrack >> "$ABCDETEMPDIR/status"
2777 # No values accepted, only uses env variables
2780 if "$CDSPEED" "$CDSPEEDOPTS" "$CDSPEEDVALUE" >/dev/null ; then
2781 vecho "Setting CD speed to ${CDSPEEDVALUE}x"
2783 echo "abcde: unable to set the device speed" >&2
2789 # vecho outputs a message if EXTRAVERBOSE is selected
2792 if [ x"$EXTRAVERBOSE" != "x" ]; then
2794 warning) shift ; log warning "$@" ;;
2802 # decho outputs a debug message if DEBUG is selected
2805 if [ x"$DEBUG" != "x" ]; then
2806 if echo $1 | grep "^\[" > /dev/null 2>&1 ; then
2807 DEBUGECHO=$(echo "$@" | tr -d '[]')
2808 echo "[DEBUG] $DEBUGECHO: `eval echo \\$${DEBUGECHO}`"
2815 # User-redefinable functions
2816 # Custom filename munging:
2819 #echo "$@" | sed s,:,\ -,g | tr \ /\* __+ | tr -d \'\"\?\[:cntrl:\]
2820 echo "$@" | sed s,:,\ -,g | tr \ / __ | tr -d \'\"\?\[:cntrl:\]
2823 # Custom genre munging:
2826 echo $CDGENRE | tr "[:upper:]" "[:lower:]"
2830 # Empty pre_read function, to be defined in the configuration file.
2837 # Empty post_read function, to be defined in the configuration file.
2843 ###############################################################################
2846 # Start of execution
2847 ###############################################################################
2852 # Defaults to FreeDB, but a python musicbrainz can be used
2854 CDDBURL="http://freedb.freedb.org/~cddb/cddb.cgi"
2855 CDDBSUBMIT=freedb-submit@freedb.org
2857 HELLOINFO="$(whoami)@$(hostname)"
2859 CDDBLOCALPOLICY="always"
2860 CDDBLOCALRECURSIVE="y"
2861 CDDBLOCALDIR="$HOME/.cddb"
2864 # List of fields we parse and show during the CDDB parsing...
2865 SHOWCDDBFIELDS="year,genre"
2868 #CDROMREADERSYNTAX=cdparanoia
2869 ENCODERSYNTAX=default
2871 MP3ENCODERSYNTAX=default
2872 OGGENCODERSYNTAX=default
2873 FLACENCODERSYNTAX=default
2874 SPEEXENCODERSYNTAX=default
2875 MPPENCODERSYNTAX=default
2876 AACENCODERSYNTAX=default
2877 NORMALIZERSYNTAX=default
2878 CUEREADERSYNTAX=default
2880 OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
2881 # Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
2882 #VAOUTPUTFORMAT=${OUTPUTFORMAT}
2883 VAOUTPUTFORMAT='Various-${ALBUMFILE}/${TRACKNUM}.${ARTISTFILE}-${TRACKFILE}'
2884 ONETRACKOUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${ALBUMFILE}'
2885 VAONETRACKOUTPUTFORMAT='Various-${ALBUMFILE}/${ALBUMFILE}'
2886 PLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
2887 PLAYLISTDATAPREFIX=''
2888 VAPLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
2889 VAPLAYLISTDATAPREFIX=''
2897 VARIOUSARTISTSTYLE=forward
2904 # If using scsi devices, cdda2wav needs a CDROMID, instead of a device node
2905 # i.e. CDROMID="1,0,0"
2907 # If we are using the IDE bus, we need CDPARANOIACDROMBUS defined as "d"
2908 # If we are using the ide-scsi emulation layer, we need to define a "g"
2909 CDPARANOIACDROMBUS="d"
2911 # program paths - defaults to checking your $PATH
2918 XINGMP3ENC=xingmp3enc
2935 CDPARANOIA=cdparanoia
2941 MUSICBRAINZ=musicbrainz-get-tracks
2945 VORBISCOMMENT=vorbiscomment
2947 NORMALIZE=normalize-audio
2949 VORBISGAIN=vorbisgain
2957 # Options for programs called from abcde
2992 VORBISCOMMENTOPTS="-R"
2993 METAFLACOPTS="--no-utf8-convert"
2996 # Default to one process if -j isn't specified
2999 # List of actions to perform - by default, run to completion
3000 ACTIONS=cddb,read,encode,tag,move,clean
3002 # This option is basicaly for Debian package dependencies:
3003 # List of prefered outputs - by default, run with whatever we have in the path
3004 DEFAULT_OUTPUT_BINARIES=vorbis:oggenc,flac:flac,mp3:toolame,mp3:lame,mp3:bladeenc,spx:speex,m4a:faac
3006 # List of prefered cdromreaders - by default, run whichever we have in the path
3007 DEFAULT_CDROMREADERS="cdparanoia cdda2wav"
3009 # Asume fetch if under FreeBSD. curl is used for Mac OS X. wget is used for
3010 # Linux/OpenBSD. ftp is user for NetBSD.
3011 # Let's use these checkings to determine the OS flavour, which will be used
3013 if [ X$(uname) = "XFreeBSD" ] ; then
3018 elif [ X$(uname) = "XDarwin" ] ; then
3021 # We should have disktool in OSX, but let's be sure...
3023 CDROMREADERSYNTAX=cddafs
3024 elif [ X$(uname) = "XOpenBSD" ] ; then
3028 elif [ X$(uname) = "XNetBSD" ] ; then
3032 elif [ X$(uname) = "SunOS" ] ; then
3040 # If CDDBAVAIL is set to n, no CDDB read is done
3041 # If USEID3 is set to n, no ID3 tagging is done
3046 if [ -z "$OUTPUTDIR" ]; then
3050 if [ -z "$WAVOUTPUTDIR" ]; then
3051 WAVOUTPUTDIR="$OUTPUTDIR"
3054 # Load system defaults
3055 if [ -r /etc/abcde.conf ]; then
3058 # Load user preference defaults
3059 if [ -r $HOME/.abcde.conf ]; then
3063 # By this time, we need some HTTPGETOPTS already defined.
3064 # If the user has defined a non-default HTTPGET method, we should not be empty.
3066 if [ "$HTTPGETOPTS" = "" ] ; then
3068 wget) HTTPGETOPTS="-q -O -";;
3069 curl) HTTPGETOPTS="-f -s";;
3070 fetch)HTTPGETOPTS="-q -o -";;
3071 ftp) HTTPGETOPTS="-a -V -o - ";;
3072 *) log warning "HTTPGET in non-standard and HTTPGETOPTS are not defined." ;;
3076 # If the CDROM has not been set yet, find a suitable one.
3077 # If this is a devfs system, default to /dev/cdroms/cdrom0
3078 # instead of /dev/cdrom
3079 if [ "$CDROM" = "" ] ; then
3080 if [ -e /dev/cdroms/cdrom0 ]; then
3081 CDROM=/dev/cdroms/cdrom0
3082 elif [ -e /dev/cdrom ]; then
3084 elif [ -e /dev/cd0c ]; then
3086 elif [ -e /dev/acd0c ]; then
3088 elif [ -e /dev/disk1 ]; then
3093 # Parse command line options
3094 #while getopts 1a:bc:C:d:Dehj:klLmMnNo:pPr:Rs:S:t:T:vVxw:W: opt ; do
3095 while getopts 1a:bBc:C:d:Defghj:klLmMnNo:pPr:s:S:t:T:UvVxX:w:W:z opt ; do
3098 a) ACTIONS="$OPTARG" ;;
3099 A) EXPACTIONS="$OPTARG" ;;
3101 B) NOBATCHREPLAYGAIN=y ;;
3102 c) if [ -e "$OPTARG" ] ; then . "$OPTARG" ; else log error "config file \"$OPTARG\" cannot be found." ; exit 1 ; fi ;;
3103 C) DISCID="$( echo ${OPTARG#abcde.} | tr -d /)" ;;
3104 d) CDROM="$OPTARG" ;;
3107 e) ERASEENCODEDSTATUS=y ;;
3108 E) ENCODING="$OPTARG" ;;
3112 j) MAXPROCS="$OPTARG" ;;
3115 L) CDDBUSELOCAL=y ;;
3120 o) OUTPUTTYPE="$OPTARG" ;;
3123 r) REMOTEHOSTS="$OPTARG" ;;
3124 R) CDDBLOCALRECURSIVE=y ;;
3125 s) SHOWCDDBFIELDS="$OPTARG" ;;
3126 S) CDSPEEDVALUE="$OPTARG" ;;
3127 t) STARTTRACKNUMBER="$OPTARG" ;;
3128 T) STARTTRACKNUMBER="$OPTARG" ; STARTTRACKNUMBERTAG="y" ;;
3131 echo "This is abcde v$VERSION."
3132 echo "Usage: abcde [options] [tracks]"
3133 echo "abcde -h for extra help"
3136 V) EXTRAVERBOSE="y" ;;
3138 X) CUE2DISCID="$OPTARG" ;;
3139 w) COMMENT="$OPTARG" ;;
3140 W) if echo $OPTARG | grep "[[:digit:]]" > /dev/null 2>&1 ; then
3141 STARTTRACKNUMBER="${OPTARG}01" ; STARTTRACKNUMBERTAG="y" ; COMMENT="CD${OPTARG}"
3143 log error "argument of -W must be integer"
3147 z) DEBUG=y ; CDROMREADERSYNTAX=debug ; EJECTCD="n" ;;
3152 shift $(($OPTIND - 1))
3154 # Here it comes the worse part of the whole thing. From here until we start
3155 # ripping, we have a mixture of sanity checks, verifications, default settigs
3156 # and other crazy stuff that interdepends, but hey, someone has to do it.
3158 # If NOCDDBQUERY is set, don't query the CDDB server.
3159 if [ "$NOCDDBQUERY" = "y" ]; then
3163 # If the user specified a flac file, then switch to special flac mode
3164 if echo "$CDROM" | grep -i '.flac$' > /dev/null 2>&1 ; then
3165 if [ ! -f "$CDROM" ]; then
3166 log error "the defined file for FLAC ripping cannot be found" >&2
3169 vecho warning "switching to flac CDROMREADERSYNTAX..."
3170 CDROMREADERSYNTAX=flac
3171 # We have a builtin version of cue2discid...
3172 case "$CUE2DISCID" in
3174 *) NEEDCUE2DISCID=y;;
3180 # If the user provided a DISCID, disable eject
3181 if [ -n "$DISCID" ] || [ "$CDROMREADERSYNTAX" = "flac" ]; then EJECTCD=n ; fi
3183 # Check the available cd rippers in the system, from the ones we know.
3184 if [ "$CDROMREADERSYNTAX" = "" ]; then
3185 for DEFAULT_CDROMREADER in $DEFAULT_CDROMREADERS; do
3186 if new_checkexec $DEFAULT_CDROMREADER; then
3187 CDROMREADERSYNTAX=$DEFAULT_CDROMREADER
3191 if [ "$CDROMREADERSYNTAX" = "" ]; then
3192 log error "no cdreader found in your PATH"
3193 log error "hints: are all dependencies installed? has the \$PATH been modified?"
3198 # Decide if we can continue.
3199 if [ "$ONETRACK" = "y" ]; then
3200 # FIXME # remove check as soon as we find out about the other readers
3201 case "$CDROMREADERSYNTAX" in
3205 *) log error "$CDROMREADERSYNTAX does not support ONETRACK mode"
3208 if [ "$BATCHNORM" = "y" ]; then
3209 log warning "BATCHNORM mode is not compatible with ONETRACK mode. Disabling..."
3212 if [ "$NOGAP" = "y" ]; then
3213 log warning "NOGAP mode is not compatible with ONETRACK mode. Disabling..."
3216 # It does not matter how many tracks we want. In ONETRACK mode we grab them all
3217 # FIXME # allow ranges of tracks to be selected for onetrack ripping
3218 if [ $# -gt 0 ]; then
3219 log warning "ONETRACK mode selected, grabbing all tracks..."
3222 while [ $# -gt 0 ]; do
3223 # Range parsing code courtesy of Vincent Ho
3224 RSTART=$(echo $1 | cut -f1 -d-)
3225 REND=$(echo $1 | cut -f2 -d-)
3226 if [ "$RSTART" = "$REND" ]; then
3229 NEWTRACKS=$(f_seq_line $RSTART $REND)
3231 TRACKQUEUE=$(echo "$TRACKQUEUE" "$NEWTRACKS")
3236 # List of valid actions: cddb,read,normalize,encode,tag,move,playlist,clean
3237 # List of experimental actions: retag,transcode
3239 # Determine what actions are to be done from $ACTIONS and set the
3240 # following environment variables for them:
3254 for ACTION in $(echo $ACTIONS | tr , \ )
3257 default) DOCDDB=y; DOREAD=y; DOENCODE=y; DOTAG=y; DOMOVE=y; DOCLEAN=y;;
3258 cue) DOCUE=y ; MAKECUEFILE=y ;;
3261 normalize) DONORMALIZE=y; DOREAD=y;;
3262 # preprocess) DOPREPROCESS=y; DOREAD=y;;
3263 encode) DOENCODE=y; DOREAD=y;;
3264 # postprocess) DOPREPROCESS=y; DOENCODE=y; DOREAD=y;;
3265 tag) DOTAG=y; DOREAD=y; DOENCODE=y; DOCDDB=y;;
3266 move) DOMOVE=y; DOTAG=y; DOREAD=y; DOENCODE=y; DOCDDB=y;;
3267 replaygain) DOCDDB=y; DOREAD=y; DOENCODE=y; DOTAG=y; DOMOVE=y; DOREPLAYGAIN=y;;
3268 playlist) DOCDDB=y; DOPLAYLIST=y;;
3273 if [ "$DONORMALIZE" = "y" ] && [ "$DOREPLAYGAIN" = "y" ]; then
3274 # FIXME # should we abort on error or just inform the user?
3275 log warning "selected both normalize and replaygain actions"
3278 for SHOWCDDBFIELD in $(echo $SHOWCDDBFIELDS | tr , \ ); do
3279 case $SHOWCDDBFIELD in
3280 y*|Y*) SHOWCDDBYEAR="y";;
3281 g*|G*) SHOWCDDBGENRE="y";;
3286 # At this point a CDROM has to be defined, so we check it exists.
3287 if [ X"$CDROM" != "X" ] ; then
3288 if [ "$CDROMREADERSYNTAX" = "cdda2wav" ] && [ "$NEEDCDROMID" = "y" ] ; then
3289 if [ "$OSFLAVOUR" = "FBSD" ]; then
3290 if echo "$CDROMID" | grep "^[0-9],[0-9],[0-9]$" >/dev/null 2>&1 ; then :; else
3291 log error "CDROMID not in the right format for $CDROMREADERSYNTAX"
3292 log error "Use \"cdrecord -scanbus\" to obtain a adecuate ID an set CDROMID accordingly"
3296 elif [ ! -e "$CDROM" -a X"$DOREAD" = "Xy" ]; then
3297 log error "CDROM device cannot be found."
3300 # avoid processing if we are not going to hit the CDROM.
3301 elif [ X"$DOREAD" = "Xy" ]; then
3302 log error "CDROM has not been defined or cannot be found"
3306 # USEPIPES pre-tests, before we get into more serious stuff
3307 # Not compatible with:
3308 # - multiple outputs
3310 # - lowdisk algorithm
3312 if [ X"$USEPIPES" = "Xy" ]; then
3313 if [ $(echo "$OUTPUTTYPE" | tr , \ | wc -w ) -gt 1 ]; then
3314 log error "Unix pipes not compatible with multiple outputs"
3317 if [ X"$DONORMALIZE" = "Xy" ]; then
3318 log error "Unix pipes not compatible with normalizer"
3319 # FIXME # Do we need to exit or shall we just disable the mode?
3322 if [ X"$BATCHNORM" = "Xy" ]; then
3323 log error "Unix pipes not compatible with BATCHNORM encoding"
3326 if [ X"$NOGAP" = "Xy" ]; then
3327 log error "Unix pipes not compatible with NOGAP encoding"
3330 if [ X"$DOENCODE" = "Xn" ]; then
3331 vecho warning "Disabling Unix pipes since we are not encoding!"
3334 if [ X"$LOWDISK" = "Xy" ]; then
3335 log error "Unix pipes not compatible with lowdisk algorithm"
3340 # LOWDISK pre-tests, before we get into more problematic stuff
3341 # Not compatible with anything that needs all the files in the hard disc:
3344 if [ X"$LOWDISK" = "Xy" ]; then
3345 if [ X"$BATCHNORM" = "Xy" ]; then
3346 log error "Unix pipes not compatible with BATCHNORM encoding"
3349 if [ X"$NOGAP" = "Xy" ]; then
3350 log error "Unix pipes not compatible with NOGAP encoding"
3355 # BATCHNORM pre-tests, before we get into serious problems
3356 # Not compatible with
3357 if [ "$BATCHNORM" = "y" ] && [ "$DONORMALIZE" = "n" ]; then
3358 vecho warning "Disabling BATCHNORM since we are not normalizing!"
3362 # Check the encoding format from the ones available in the system, if nothing has been configured in the system.
3363 if [ X"$OUTPUTTYPE" = "X" ]; then
3364 for DEFAULT_OUTPUT in $( echo "$DEFAULT_OUTPUT_BINARIES" | tr , \ ); do
3365 DEFAULT_OUTPUT_FORMAT="$(echo $DEFAULT_OUTPUT | cut -d ":" -f 1)"
3366 DEFAULT_OUTPUT_BINARY="$(echo $DEFAULT_OUTPUT | cut -d ":" -f 2)"
3367 if [ -x $(which $DEFAULT_OUTPUT_BINARY) ] ; then
3368 OUTPUTTYPE=$DEFAULT_OUTPUT_FORMAT
3369 vecho "No default output type defined. Autoselecting $OUTPUTTYPE..." >&2
3373 if [ X"$OUTPUTTYPE" = "X" ]; then
3374 log error "no encoder found in the PATH"
3375 log error "hints: are all dependencies installed? has the \$PATH been modified?"
3380 # Decide which CDROM reader we're gonna use
3381 case "$CDROMREADERSYNTAX" in
3383 CDROMREADER="$CDPARANOIA"
3384 CDROMREADEROPTS="$CDPARANOIAOPTS"
3387 CDROMREADER="$CDDA2WAV"
3388 CDROMREADEROPTS="$CDDA2WAVOPTS"
3391 CDROMREADER="$DAGRAB"
3392 CDROMREADEROPTS="$DAGRABOPTS"
3395 CDROMREADER="$CDDAFS"
3396 CDROMREADEROPTS="$CDDAFSOPTS"
3400 CDROMREADEROPTS="$FLACOPTS"
3404 # There's only one normalize...
3405 case "$NORMALIZERSYNTAX" in
3407 NORMALIZER="$NORMALIZE"
3408 NORMALIZEROPTS="$NORMALIZEOPTS"
3412 # Allow -o OUTPUT(1):OPTIONS(1),...,OUTPUT(N):OPTIONS(N) mode of operation
3413 if echo "$OUTPUTTYPE" | grep ":" > /dev/null 2>&1 ; then
3414 for OUTPUT in "$(echo "$OUTPUTTYPE" | tr \ \|| tr , \ | tr \| \ )"; do
3416 vorbis:*|ogg:*) OGGENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
3417 mp3:*) MP3ENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
3418 flac:*) FLACENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
3419 spx:*) SPEEXENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
3420 mpc:*) MPPENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
3421 m4a:*) AACENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
3424 for OUTPUT in "$(echo "$OUTPUTTYPE" | tr , \ )"; do
3425 TEMPOUTPUT=$( echo "$OUTPUT" | cut -d: -f1 )
3426 TEMPOUTPUTTYPE="${TEMPOUTPUTTYPE:+$TEMPOUTPUTTYPE,}$TEMPOUTPUT"
3428 OUTPUTTYPE="$TEMPOUTPUTTYPE"
3431 # If nothing has been specified, use oggenc for oggs and lame for mp3s and flac
3432 # for flacs and speexenc for speex and mppenc for mpps and faac for m4as
3434 # Getting ready for multiple output changes
3435 for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
3439 [ "$OGGENCODERSYNTAX" = "default" ] && OGGENCODERSYNTAX=oggenc
3440 [ "$DOTAG" = "y" ] && NEEDCOMMENTER=y
3441 [ "$DOREPLAYGAIN" = "y" ] && NEEDVORBISGAIN=y
3442 OGGOUTPUTCONTAINER=ogg
3445 [ "$MP3ENCODERSYNTAX" = "default" ] && MP3ENCODERSYNTAX=lame
3446 [ "$DOTAG" = "y" ] && NEEDTAGGER=y
3447 [ "$DOREPLAYGAIN" = "y" ] && NEEDMP3GAIN=y
3450 [ "$FLACENCODERSYNTAX" = "default" ] && FLACENCODERSYNTAX=flac
3451 [ "$DOTAG" = "y" ] && NEEDMETAFLAC=y
3452 [ "$DOREPLAYGAIN" = "y" ] && NEEDMETAFLAC=y
3453 [ "$ONETRACK" = "y" ] && [ "$DOCUE" = "y" ] && NEEDMETAFLAC=y
3456 [ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX=speexenc
3457 # [ "$DOREPLAYGAIN" = "y" ] &&
3460 [ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX=mppenc
3461 [ "$DOREPLAYGAIN" = "y" ] && NEEDMPPGAIN=y
3464 [ "$AACENCODERSYNTAX" = "default" ] && AACENCODERSYNTAX=faac
3467 if [ "$KEEPWAVS" = "y" ]; then
3468 vecho "Setting the KEEPWAVS option, since the resulting wav files were requested..."
3472 *) log error "Invalid OUTPUTTYPE defined"
3478 # decide which encoder
3479 case "$MP3ENCODERSYNTAX" in
3481 MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$LAMEOPTS}"
3485 MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$TOOLAMEOPTS}"
3486 MP3ENCODER="$TOOLAME"
3489 MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$GOGOOPTS}"
3493 MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$BLADEENCOPTS}"
3494 MP3ENCODER="$BLADEENC"
3497 MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$L3ENCOPTS}"
3501 MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$XINGMP3ENCOPTS}"
3502 MP3ENCODER="$XINGMP3ENC"
3505 MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$MP3ENCOPTS}"
3506 MP3ENCODER="$MP3ENC"
3509 case "$OGGENCODERSYNTAX" in
3511 OGGENCODEROPTS="${OGGENCODEROPTSCLI:-$VORBIZEOPTS}"
3512 OGGENCODER="$VORBIZE"
3515 OGGENCODEROPTS="${OGGENCODEROPTSCLI:-$OGGENCOPTS}"
3516 OGGENCODER="$OGGENC"
3519 case "$FLACENCODERSYNTAX" in
3521 FLACENCODEROPTS="${FLACENCODEROPTSCLI:-$FLACOPTS}"
3523 # FLAC streams can be encapsulated on a Ogg transport layer
3524 if echo "$FLACENCODEROPTS" | egrep -- "(^| )--ogg($| )" > /dev/null 2>&1 ;then
3525 log error "FLAC on an Ogg container is not yet supported"
3526 log error "due to problem with adding comments to such files"
3528 FLACOUTPUTCONTAINER=ogg
3530 FLACOUTPUTCONTAINER=flac
3534 case "$SPEEXENCODERSYNTAX" in
3536 SPEEXENCODEROPTS="${SPEEXENCODEROPTSCLI:-$SPEEXENCOPTS}"
3537 SPEEXENCODER="$SPEEXENC"
3540 case "$MPPENCODERSYNTAX" in
3542 MPPENCODEROPTS="${MPPENCODEROPTSCLI:-$MPPENCOPTS}"
3543 MPPENCODER="$MPPENC"
3546 case "$AACENCODERSYNTAX" in
3548 AACENCODEROPTS="${AACENCODEROPTSCLI:-$AACENCOPTS}"
3549 AACENCODER="$AACENC"
3554 if [ "$ID3TAGV" = "1" ]; then
3556 TAGGEROPTS="$ID3OPTS"
3559 TAGGEROPTS="$ID3V2OPTS"
3562 # Specific for NOGAP is the use of lame. Another encoder fails...
3563 if [ "$NOGAP" = "y" ] && [ ! "$MP3ENCODER" = "lame" ]; then
3564 log warning "the NOGAP option is specific of lame. Deactivating..."
3569 case "$CUEREADERSYNTAX" in
3571 CUEREADEROPTS="${CDROM}"
3576 # which information retrieval tool are we using?
3582 # Check if both OGGEOUTPUTCONTAINER and FLACOUTPUTCONTAINER are the same, and differentiante them
3583 if [ X"$OGGOUTPUTCONTAINER" = "Xogg" ] && [ X"$FLACOUTPUTCONTAINER" = "Xogg" ]; then
3584 log error "FLAC on an Ogg container is not yet supported"
3585 log error "due to problem with adding comments to such files"
3587 OGGOUTPUTCONTAINER=ogg.ogg
3588 FLACOUTPUTCONTAINER=flac.ogg
3589 vecho warning "modified file endings due to conflicting transport layers in Ogg/Vorbis and Ogg/FLAC"
3592 # Clean up nice options (either use '-n NICELEVEL or -NICELEVEL')
3594 if [ "$ENCNICE" ]; then
3595 ENCNICE="-n $ENCNICE"
3597 if [ "$READNICE" ]; then
3598 READNICE="-n $READNICE"
3600 if [ "$DISTMP3NICE" ]; then
3601 DISTMP3NICE="-n $DISTMP3NICE"
3604 # Don't check for stuff if it's not needed
3605 if [ "$REMOTEHOSTS" ]; then
3608 if [ "$DONORMALIZE" = "y" ]; then
3611 if [ "$EJECTCD" = "y" ]; then
3614 if [ ! "$CDDBAVAIL" = "n" ] && [ "$DOCDDB" = "y" ]; then
3615 if [ "$CDDBMETHOD" = "cddb" ]; then
3617 elif [ "$CDDBMETHOD" = "musicbrainz" ]; then
3621 if [ "$DOCUE" = "y" ]; then
3625 if [ X"$CDSPEEDVALUE" != "X" ] && [ "$DOREAD" = "y" ]; then
3626 case "$CDROMREADERSYNTAX" in
3627 cdparanoia|debug) CDROMREADEROPTS="$CDPARANOIAOPTS -S $CDSPEEDVALUE" ;;
3628 ### FIXME ### translate "cue2discid" from python to bash
3629 flac) NEEDMETAFLAC=y ; NEEDCUE2DISCID=y ; CDSPEEDVALUE="" ;;
3634 ###USEPIPESSUPPORT###
3636 # Rippers with USEPIPE support
3637 # FIXME # Include here all the rippers we can figure out support pipes
3638 PIPERIPPER_cdparanoia="-"
3639 PIPERIPPER_debug="-"
3640 PIPERIPPER_flac="-c "
3642 # Encoders with USEPIPE support
3643 # FIXME # Include here all the encoders we can figure out support pipes
3649 # Figure out if we can use pipes with the ripper/encoder combination
3651 if [ "$USEPIPES" = "y" ]; then
3652 PIPERIPPERSVARCHECK="PIPERIPPER_${CDROMREADERSYNTAX}"
3655 PIPEENCODERSVARCHECK="PIPE_$MP3ENCODERSYNTAX" ;;
3657 PIPEENCODERSVARCHECK="PIPE_$OGGENCODERSYNTAX" ;;
3659 PIPEENCODERSVARCHECK="PIPE_$FLACENCODERSYNTAX" ;;
3661 PIPEENCODERSVARCHECK="PIPE_$SPEEXENCODER" ;;
3663 PIPEENCODERSVARCHECK="PIPE_$MPPENCODER" ;;
3665 decho "PIPERIPPERSVARCHECK: $( eval echo "\$$PIPERIPPERSVARCHECK" )"
3666 if [ "$( eval echo "\$$PIPERIPPERSVARCHECK" )" = "$" ] || \
3667 [ "$( eval echo "\$$PIPERIPPERSVARCHECK" )" = "" ] ; then
3668 log error "no support for pipes with given ripper"
3669 log error "read the USEPIPES file from the source tarball to get help."
3670 log error "On a Debian system, it is under /usr/share/doc/abcde/USEPIPES.gz"
3673 decho "PIPEENCODERSVARCHECK: $( eval echo "\$$PIPEENCODERSVARCHECK" )"
3674 if [ "$( eval echo "\$$PIPEENCODERSVARCHECK" )" = "$" ] || \
3675 [ "$( eval echo "\$$PIPEENCODERSVARCHECK" )" = "" ] ; then
3676 log error "no support for pipes with given encoder"
3677 log error "read the USEPIPES file from the source tarball to help"
3678 log error "on a Debian system, read /usr/share/doc/abcde/USEPIPES.gz"
3683 # Make sure a buncha things exist
3684 for X in $CDROMREADER $CDDISCID ${NEEDTAGGER+$TAGGER} $MP3ENCODER \
3685 $OGGENCODER $FLACENCODER $SPEEXENCODER $MPPENCODER \
3687 ${NEEDHTTPGET+$HTTPGET} ${NEEDDISTMP3+$DISTMP3} \
3688 ${NEEDCOMMENTER+$VORBISCOMMENT} ${NEEDMETAFLAC+$METAFLAC} \
3689 ${NEEDNORMALIZER+$NORMALIZER} ${NEEDEJECT+$EJECT} \
3690 ${NEEDDISKTOOL+disktool} ${NEEDCDSPEED+$CDSPEED} \
3691 ${NEEDVORBISGAIN+$VORBISGAIN} ${NEEDMP3GAIN+$MP3GAIN} \
3692 ${NEEDMPPGAIN+$MPPGAIN} ${NEEDCUEREADER+$CUEREADER} \
3693 ${NEEDCUE2DISCID+$CUE2DISCID}
3698 # And last but not least, check if we can diff between files. We do not abort,
3699 # since diffing is not critical...
3700 if [ -x $(which $DIFF) ]; then :; else
3701 vecho warning "Disabling diff since we cannot find it in the \$PATH..."
3705 ## Now that we have metaflac, check if we need cue2discid
3706 #case $CDROMREADERSYNTAX in
3708 # TRACKINFO=$($METAFLAC --show-tag=CDDB $CDROM | cut -d"=" -f2 | egrep "[a-f0-9]{8}")
3709 # if [ "$TRACKINFO" = "" ]; then
3710 # checkexec ${NEEDCUE2DISCID+$CUE2DISCID}
3715 CDROMREADER="$CDROMREADER $CDROMREADEROPTS"
3716 CDDBTOOL="$CDDBTOOL $CDDBTOOLOPTS"
3717 HTTPGET="$HTTPGET $HTTPGETOPTS"
3719 # Here it used to say:
3720 # One thousand lines in, we can start doing stuff with things
3721 # Well, right now we are at line 3306 ;)
3723 # Export needed things so they can be read in this subshell
3724 export CDDBTOOL ABCDETEMPDIR TRACKQUEUE LOWDISK EJECTCD EJECT EJECTOPTS
3725 export CDROM CDDBDATA REMOTEHOSTS MAXPROCS HTTPGET MD5SUM
3727 if [ "$DOREAD" = "y" ]; then
3728 # User-definable function to set some things. Use it for
3729 # - closing the CD tray with eject -t
3730 # - set the CD speed value with eject -x
3731 vecho -n "Executing customizable pre-read function... "
3733 pre_read # Execute the user-defined pre-read funtion. Close the CD with it.
3738 case "$CDDBMETHOD" in
3740 do_discid # Get ABCDETEMPDIR created and status file initialized
3747 if [ "$DOCDDB" = "y" ]; then
3748 # start with a sane default:
3749 CDDBLOCALSTATUS=notfound
3750 if [ $CDDBUSELOCAL = "y" ]; then
3753 if checkstatus cddb-choice > /dev/null; then
3756 if [ "$CDDBLOCALSTATUS" = "notfound" ] ; then
3757 case "$CDDBMETHOD" in
3771 eval "$($CDDBTOOL parse "$CDDBDATA")"
3774 # Before reading tracks, we set the speed of the device
3776 if [ X"$CDSPEEDVALUE" != "X" ]; then
3777 case "$CDROMREADERSYNTAX" in
3778 cdparanoia|debug) ;;
3784 # Define the first and last track, since we might need them later in several places
3785 FIRSTTRACK=$( get_first $TRACKQUEUE )
3786 LASTTRACK=$( get_last $TRACKQUEUE )
3788 if [ -f "$ABCDETEMPDIR/status" ] && [ X"$ERASEENCODEDSTATUS" = "Xy" ]; then
3789 mv "$ABCDETEMPDIR/status" "$ABCDETEMPDIR/status.old"
3790 grep -v ^encodetracklocation- < "$ABCDETEMPDIR/status.old" \
3791 | grep -v ^encode-output > "$ABCDETEMPDIR/status"
3794 if checkstatus onetrack ; then ONETRACK=y ; fi
3796 if [ "$ONETRACK" = "y" ]; then
3797 # Reuse the CUEFILE in case we created it (now or in a previous run)
3798 if CUEFILE=$(checkstatus cuefile); then
3803 # Create playlist if needed (backgroundable) and start reading in tracks
3807 if [ ! "$ONETRACK" = "y" ]; then
3808 if [ "$DOPLAYLIST" = "y" ]; then
3809 echo Creating playlist... >&2
3814 # For the lowdisk option, only one program is running at once so the encoder
3815 # can be unsilenced right away.
3816 if [ "$LOWDISK" = "y" ] || [ "$ONETRACK" = "y" ]; then
3817 echo "encode-output=loud" >> "$ABCDETEMPDIR/status"
3820 if [ "$ONETRACK" = "y" ]; then
3821 TRACKS="$FIRSTTRACK"
3822 if [ "$USEPIPES" = "y" ]; then
3823 if checkstatus readencodetrack-$FIRSTTRACK; then :; else
3824 do_cdread onetrack $FIRSTTRACK $LASTTRACK | do_encode $FIRSTTRACK %local0% > /dev/null 2>&1
3827 if checkstatus readtrack-$FIRSTTRACK; then :; else
3828 do_cdread onetrack $FIRSTTRACK $LASTTRACK
3832 for UTRACKNUM in $TRACKQUEUE
3834 if [ "$DOREAD" = "y" ]; then
3835 if [ "$USEPIPES" = "y" ]; then
3836 if checkstatus readencodetrack-$UTRACKNUM; then :; else
3837 # Read, pipe, shut up!
3838 do_cdread $UTRACKNUM | do_encode $UTRACKNUM %local0% > /dev/null 2>&1
3841 if checkstatus readtrack-$UTRACKNUM; then :; else
3842 do_cdread $UTRACKNUM
3844 if [ "$?" != "0" ]; then
3845 # CD read failed - don't give the goahead to
3852 if [ "$NOGAP" = "y" ] || [ "$BATCHNORM" = "y" ]; then
3855 # If we are not reading, set the encode output to loud already, so
3856 # that we can see the output of the first track.
3857 if [ "$MAXPROCS" = "1" ] && [ ! "$DOREAD" = "y" ]; then
3858 echo "encode-output=loud" >> "$ABCDETEMPDIR/status"
3860 echo NEXTTRACK # Get the encoder machine churning again
3861 if [ "$DOREAD" = "y" ]; then
3862 if [ "$LOWDISK" = "y" ] && [ "$DOENCODE" = "y" ]; then
3863 until checkstatus encodetrack-$UTRACKNUM
3865 if checkerrors encodetrack-$UTRACKNUM; then
3876 # Now that we're done the encoding can be loud again -
3877 # if we're not using SMP.
3878 if [ "$MAXPROCS" = "1" ]; then
3879 echo "encode-output=loud" >> "$ABCDETEMPDIR/status"
3882 # All tracks read, start encoding.
3883 if [ "$NOGAP" = "y" ] || [ "$BATCHNORM" = "y" ] || [ "$ONETRACK" = "y" ]; then
3887 # Execute the user-defined post_read funtion before ejecting CD
3890 # We are now finished with the cdrom - it can be safely ejected. Note that
3891 # abcde will not have completed yet.
3892 if [ "$EJECTCD" = "y" ] && [ -x $(which $EJECT) ]; then
3893 # We check if the disk we are processing is actually the disk inside the
3894 # CD tray. If not, we do not eject the CD, since it might be so that the
3895 # user ejected it manually.
3896 #CURRENTTRACKINFO=$($CDDISCID $CDROM)
3897 #if if [ "$?" != "1" ] && [ "$CURRENTTRACKINFO" = "$TRACKINFO" ] ; then
3898 # More FreeBSD bits.
3899 if [ X"$(uname)" = X"FreeBSD" ] ; then
3900 # FreeBSD eject uses the EJECT environment variable to name the CDROM
3901 # but in this script EJECT is in the envionment and names the program
3904 # The FreeBSD eject needs "adc0" not "/dev/adc0c"
3905 cd="$(echo $CDROM | sed -e 's=.*/==;s=[a-h]$==;')"
3906 $eject $EJECTOPTS $cd
3907 elif [ X"$(uname)" = X"Darwin" ] ; then
3908 disktool -e ${CDROM#/dev/} 0
3910 $EJECT $EJECTOPTS "$CDROM"
3917 ## Do we need to pre-process
3918 #if [ x"$PREPROCESS" = "x" ] ; then
3921 # for PRETRACKNUM in $TRACKQUEUE
3924 # if [ "$GOAHEAD" = "NO" ]; then break; fi
3926 # until [ $PREPROCEED ]
3928 # if checkstatus readtrack-$PRETRACKNUM; then PREPROCEED=y; break; fi
3929 # # all locations are working, wait and try again later
3930 # if [ ! $PREPROCEED ]; then sleep 3; fi
3932 # ( do_preprocess $PRETRACKNUM
3940 # In BATCHNORM and/or NOGAP modes, we want all tracks to be read first.
3942 if [ "$BATCHNORM" = "y" ] || [ "$NOGAP" = "y" ]; then
3943 read GOAHEAD # For blocking - will contain either "NO" or "NEXTTRACK"
3944 if [ "$GOAHEAD" = "NO" ]; then break; fi
3945 for LASTTRACK in $TRACKQUEUE; do :; done
3946 if checkstatus readtrack-$LASTTRACK; then
3947 if [ "$DONORMALIZE" = "y" ] && [ "$BATCHNORM" = "y" ]; then
3948 if checkstatus normalizetrack-$LASTTRACK; then :; else do_batch_normalize; fi
3949 if checkerrors batch-normalize; then exit 1; fi
3951 if [ "$DOENCODE" = "y" ] && [ "$NOGAP" = "y" ]; then
3952 if [ "$DONORMALIZE" = "y" ]; then
3953 for UTRACKNUM in $TRACKQUEUE
3955 if checkstatus readtrack-$UTRACKNUM; then
3956 if checkstatus normalizetrack-$UTRACKNUM; then :; else do_normalize $UTRACKNUM; fi
3960 if checkstatus encodetrack-$LASTTRACK; then :; else do_nogap_encode; fi
3961 if checkerrors nogap-encode; then exit 1; fi
3966 # If we are using ONETRACK, we can proceed with the normal encoding using just the $FIRSTTRACK as TRACKQUEUE
3967 if [ "$ONETRACK" = "y" ] ; then
3968 TRACKQUEUE="$FIRSTTRACK"
3969 TRACKS="$FIRSTTRACK"
3972 # Do the encoding, including parallelization of remote encoding
3973 # Figure out where each track is going to be encoded
3974 ENCODELOCATIONS="$(echo $REMOTEHOSTS | tr , ' ')"
3975 if [ "$MAXPROCS" != "0" ]; then
3976 for NUM in $(f_seq_row 1 "$MAXPROCS")
3978 ENCODELOCATIONS="$ENCODELOCATIONS %local$NUM%"
3982 ENCODELOCATIONS=$(echo $ENCODELOCATIONS)
3983 for UTRACKNUM in $TRACKQUEUE
3986 read GOAHEAD # For blocking - will contain either "NO" or "NEXTTRACK"
3987 if [ "$GOAHEAD" = "NO" ]; then break; fi
3988 # find out where this track is to be encoded
3989 if [ "$DOENCODE" = "y" -a "$USEPIPES" != "y" ]; then
3990 # Make sure we have a place to encode this, if not, exit stage right
3991 if [ -z "$ENCODELOCATIONS" ]; then
3997 for LOCATION in $ENCODELOCATIONS
3999 PREVIOUSTRACK="$(checkstatus encodetracklocation-$LOCATION)"
4000 # check first if a track has ever been assigned to this location
4001 if [ -z "$PREVIOUSTRACK" ]; then PROCEED=y; break; fi
4002 # If it errored out, rebuild $ENCODELOCATIONS without this location in it
4003 if checkerrors encodetrack-$PREVIOUSTRACK; then
4004 for TEMPLOCATION in $ENCODELOCATIONS
4006 if [ "$TEMPLOCATION" != "$LOCATION" ]; then
4007 TEMPENCODELOCATIONS="$TEMPENCODELOCATIONS $TEMPLOCATION"
4010 ENCODELOCATIONS=$(echo $TEMPENCODELOCATIONS)
4015 # We're still here, this location must have been previously assigned,
4016 # and last completed without error - check if it's done with the
4017 # previous track yet
4018 if checkstatus encodetrack-$PREVIOUSTRACK; then PROCEED=y; break; fi
4020 # all locations are working, wait and try again later
4021 if [ ! $PROCEED ]; then sleep 3; fi
4023 # Record the location we're about to encode the next track at
4024 echo "encodetracklocation-$LOCATION=$UTRACKNUM" >> "$ABCDETEMPDIR/status"
4026 # Don't proceed with the rest of the loop if we can't encode
4027 if [ "$ABORT" ]; then continue; fi
4028 ## FIXME ## Add here
4029 ## run_command tagtrack-$OUTPUT-$1 $METAFLAC $METAFLACOPTS ${IMPORTCUESHEET:+--import-cuesheet-from="$ABCDETEMPDIR/$CUEFILE"} --import-tags-from=- "$ABCDETEMPDIR/track$1.$FLACOUTPUTCONTAINER"
4030 # Set TRACKNUM, TRACKNAME
4031 if [ -e "$CDDBDATA" ]; then
4032 if [ "$ONETRACK" = "y" ]; then
4034 TRACKNUM="$FIRSTTRACK"
4038 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
4039 getcddbinfo TRACKNAME
4043 # You can't encode a file which needs to be normalized before finishing
4044 # You can't tag a file before it's finished encoding -
4045 # thus all of this is backgrounded together
4047 if [ "$DONORMALIZE" = "y" ]; then
4048 if checkstatus readtrack-$UTRACKNUM; then
4049 if checkstatus normalizetrack-$UTRACKNUM; then :; else do_normalize $UTRACKNUM; fi
4052 if [ "$DOENCODE" = "y" -a "$USEPIPES" != "y" ]; then
4053 if checkstatus readtrack-$UTRACKNUM; then
4054 #if checkstatus encodetrack-$UTRACKNUM; then :; else do_encode $UTRACKNUM $LOCATION; fi
4055 if [ "$DONORMALIZE" = "y" ]; then
4056 if checkstatus normalizetrack-$UTRACKNUM; then
4057 if checkstatus encodetrack-$UTRACKNUM; then :; else do_encode $UTRACKNUM $LOCATION $OUTPUT; fi
4060 if checkstatus encodetrack-$UTRACKNUM; then :; else do_encode $UTRACKNUM $LOCATION $OUTPUT; fi
4064 if [ "$DOTAG" = "y" ]; then
4065 if checkstatus encodetrack-$UTRACKNUM; then
4066 if checkstatus tagtrack-$UTRACKNUM; then :; else do_tag $UTRACKNUM; fi
4068 # Lets tag the cue file
4069 if checkstatus cleancuefile >/dev/null; then :; else
4070 if checkstatus cuefile >/dev/null ; then
4075 if [ "$DOMOVE" = "y" ]; then
4076 if checkstatus tagtrack-$UTRACKNUM; then
4077 if checkstatus movetrack-$UTRACKNUM; then :; else do_move $UTRACKNUM; fi
4084 # Go through it again and make sure there's no distmp3 stragglers, otherwise
4085 # we'll delete the files they're working on
4086 # Do NOT play ball if there is no ball to play (so ABORT if needed)
4087 ## FIXME ## Check also for files which are encoded using PIPEs.
4088 if [ "$DOENCODE" = "y" ] && [ "$USEPIPES" != "y" ] && [ ! "$ABORT" ]; then
4093 for LOCATION in $ENCODELOCATIONS
4095 CHECKTRACK="$(checkstatus encodetracklocation-$LOCATION)"
4096 # "How can he give us a status update, if he's DEAD?"
4097 if checkstatus encodetrack-$CHECKTRACK; then
4100 # Nothing to see here please go quietly back to your homes
4101 if [ -z "$CHECKTRACK" ]; then continue; fi
4102 # You're still here? Maybe there is something...
4103 if checkstatus encodetrack-$CHECKTRACK; then :; else PROCEED= ; break; fi
4106 if [ ! $PROCEED ]; then sleep 5; fi
4109 # If the above didn't catch the stragglers, this will
4111 if [ "$DOREPLAYGAIN" = "y" ]; then
4115 # Check to see if run_command logged any errors
4116 if [ -f "$ABCDETEMPDIR/errors" ]; then
4117 log error "The following commands failed to run:"
4118 cat "$ABCDETEMPDIR/errors"
4122 if [ "$KEEPWAVS" = "y" ];then
4126 # Check if we have moved all the formats we had previously encoded, if we are not using the FORCE.
4127 if [ "$DOCLEAN" = "y" ] && [ ! "$FORCE" = "y" ]; then
4128 ENCODED_FORMATS=$(egrep "^encodetrack-(.{3,6})-(.{1,2})$" "$ABCDETEMPDIR/status" | cut -d"-" -f2 | sort -u | tr '\n' '|')
4129 MOVED_FORMATS=$(egrep "^movetrack-output-(.{3,6})$" "$ABCDETEMPDIR/status" | cut -d"-" -f3 | sort -u | tr '\n' '|')
4130 if [ "$ENCODED_FORMATS" != "$MOVED_FORMATS" ]; then
4131 log warning "The encoded formats does not match with the moved ones"
4132 log warning "Formats encoded: $( echo $ENCODED_FORMATS | tr "|" " " )"
4133 log warning "Formats moved: $( echo $MOVED_FORMATS | tr "|" " " )"
4134 log warning "Use \"abcde -a clean -f -C $DISCID\" to force the removal of the remaining data."
4138 if [ "$DOCLEAN" = "y" ]; then
4139 # Wipe all the evidence
4140 # Gimme gimme gimme some more time!
4142 rm -rf "$ABCDETEMPDIR"
4145 echo "Finished. Not cleaning $ABCDETEMPDIR."